🌴 Sync 2026-03-05 23:51:42

autocore/Makefile

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2020 Lean <coolsnowwolf@gmail.com>
+# Copyright (C) 2021-2023 ImmortalWrt.org
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=autocore
+PKG_FLAGS:=nonshared
+PKG_RELEASE:=1
+
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_TARGET_bcm27xx \
+	CONFIG_TARGET_bcm53xx \
+	CONFIG_TARGET_x86
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/target.mk
+
+define Package/autocore
+  TITLE:=auto core loadbalance script.
+  DEPENDS:=@(aarch64||arm||i386||i686||x86_64) \
+    +TARGET_bcm27xx:bcm27xx-utils \
+    +TARGET_bcm53xx:nvram \
+    +TARGET_x86:ethtool \
+    +TARGET_x86:lm-sensors
+endef
+
+define Build/Compile
+endef
+
+define Package/autocore/install
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) ./files/60-autocore-reload-rpcd $(1)/etc/uci-defaults/
+
+ifneq ($(filter i386 i686 x86_64, $(ARCH)),)
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/autocore $(1)/etc/init.d/
+endif
+
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) ./files/cpuinfo $(1)/sbin/
+ifneq ($(filter ipq% mediatek% qualcommax%, $(TARGETID)),)
+	$(INSTALL_BIN) ./files/tempinfo $(1)/sbin/
+endif
+
+	$(INSTALL_DIR) $(1)/usr/share/rpcd/acl.d
+	$(CP) ./files/luci-mod-status-autocore.json $(1)/usr/share/rpcd/acl.d/
+endef
+
+$(eval $(call BuildPackage,autocore))

autocore/files/60-autocore-reload-rpcd

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+/etc/init.d/rpcd restart
+
+exit 0

autocore/files/autocore

@@ -0,0 +1,39 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2017 lean <coolsnowwolf@gmail.com>
+
+START=99
+
+start() {
+	rfc=4096
+	threads="$(grep -c "processor" "/proc/cpuinfo")"
+
+	sysctl -w net.core.rps_sock_flow_entries="$(( rfc * threads ))"
+
+	for fileRps in /sys/class/net/eth*/queues/rx-*/rps_cpus
+	do
+		echo "$threads" > "$fileRps"
+	done
+
+	for fileRfc in /sys/class/net/eth*/queues/rx-*/rps_flow_cnt
+	do
+		echo "$rfc" > "$fileRfc"
+	done
+
+	for i in $(ip address | awk -F ': ' '/eth[0-9]+/ {print $2}' | grep -v '@' | xargs)
+	do
+		ethtool -K "$i" rx-checksum on
+		ethtool -K "$i" tx-checksum-ip-generic on || {
+			ethtool -K "$i" tx-checksum-ipv4 on
+			ethtool -K "$i" tx-checksum-ipv6 on
+		}
+		ethtool -K "$i" tx-scatter-gather on
+		ethtool -K "$i" gso on
+		ethtool -K "$i" tso on
+		ethtool -K "$i" ufo on
+
+		if ethtool -i "$i" | grep -q "driver: igc"; then
+			ethtool -G "$i" rx "$(ethtool -g "$i" | awk '/^RX:/ {print $2; exit}')"
+			ethtool -G "$i" tx "$(ethtool -g "$i" | awk '/^TX:/ {print $2; exit}')"
+		fi
+	done
+} >"/dev/null" 2>&1

autocore/files/cpuinfo

@@ -0,0 +1,62 @@
+#!/bin/sh
+
+. /etc/openwrt_release
+
+CPUINFO_PATH="/proc/cpuinfo"
+CPUFREQ_PATH="/sys/devices/system/cpu/cpufreq"
+THERMAL_PATH="/sys/class/thermal"
+
+cpu_arch="$(awk -F ': ' '/model name/ {print $2}' "$CPUINFO_PATH" | head -n1)"
+[ -n "${cpu_arch}" ] || cpu_arch="ARMv8 Processor"
+
+case "$DISTRIB_TARGET" in
+"x86"/*)
+	cpu_cores="$(grep "core id" "$CPUINFO_PATH" | sort -u | wc -l)C $(grep -c "processor" "$CPUINFO_PATH")T" ;;
+*)
+	cpu_cores="$(grep -c "processor" "$CPUINFO_PATH")" ;;
+esac
+
+case "$DISTRIB_TARGET" in
+"bcm27xx"/*)
+	cpu_freq="$(( $(vcgencmd measure_clock arm | awk -F '=' '{print $2}') / 1000000 ))Mhz" ;;
+"bcm53xx"/*)
+	cpu_freq="$(nvram get clkfreq | awk -F ',' '{print $1}')MHz" ;;
+"rockchip"/*)
+	cpu_freq="$(awk '{printf("%.fMHz ", $0 / 1000)}' "$CPUFREQ_PATH"/policy*/cpuinfo_cur_freq | awk '$1=$1')" ;;
+"x86"/*)
+	cpu_freq="$(awk -F ': ' '/MHz/ {print $2}' "$CPUINFO_PATH" | head -n1)MHz" ;;
+*)
+	[ ! -e "$CPUFREQ_PATH/policy0/cpuinfo_cur_freq" ] || \
+		cpu_freq="$(awk '{printf("%.fMHz", $0 / 1000)}' "$CPUFREQ_PATH/policy0/cpuinfo_cur_freq")"
+	;;
+esac
+
+case "$DISTRIB_TARGET" in
+"bcm27xx"/*)
+	cpu_temp="$(vcgencmd measure_temp | awk -F '=' '{print $2}' | awk -F "'" '{print $1}')°C" ;;
+"ipq40xx"/*|"ipq806x"/*|"mediatek"/*|"qualcommax"/*) ;;
+"x86"/*)
+	if [ -n "$(uci -q get "wechatpush.config.server_host")" ]; then
+		cpu_temp="$(/usr/share/wechatpush/wechatpush soc)°C"
+	elif grep -q "GenuineIntel" "/proc/cpuinfo"; then
+		cpu_temp="$(sensors "coretemp-*" 2>"/dev/null" | grep -E "(Package id |Core )" | grep -Eo "\+[0-9.]*°C" | head -n1 | tr -d "+")"
+	elif grep -q "AuthenticAMD" "/proc/cpuinfo"; then
+		cpu_temp="$(sensors "k10temp-*" 2>"/dev/null" | awk '/Tctl|Tdie/ {print $2}' | head -n1 | tr -d "+")"
+	fi
+	[ -n "${cpu_temp}" ] || cpu_temp="$(sensors 2>/dev/null | grep 'Core 0' | cut -c12-)"
+	;;
+*)
+	[ ! -e "$THERMAL_PATH/thermal_zone0/temp" ] || \
+		cpu_temp="$(awk '{printf("%.1f°C", $0 / 1000)}' "$THERMAL_PATH/thermal_zone0/temp")"
+	;;
+esac
+
+if [ -z "$cpu_freq" ] && [ -n "$cpu_temp" ]; then
+	echo -n "$cpu_arch x $cpu_cores ($cpu_temp)"
+elif [ -z "$cpu_temp" ] && [ -n "$cpu_freq" ]; then
+	echo -n "$cpu_arch x $cpu_cores ($cpu_freq)"
+elif [ -n "$cpu_temp" ] && [ -n "$cpu_freq" ]; then
+	echo -n "$cpu_arch x $cpu_cores ($cpu_freq, ${cpu_temp})"
+else
+	echo -n "$cpu_arch x $cpu_cores"
+fi

autocore/files/luci-mod-status-autocore.json

@@ -0,0 +1,10 @@
+{
+	"luci-mod-status-autocore": {
+		"description": "Grant access to autocore",
+		"read": {
+			"ubus": {
+				"luci": [ "getCPUInfo", "getTempInfo" ]
+			}
+		}
+	}
+}

autocore/files/tempinfo

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+. /etc/openwrt_release
+
+IEEE_PATH="/sys/class/ieee80211"
+THERMAL_PATH="/sys/class/thermal"
+
+case "$DISTRIB_TARGET" in
+ipq40xx/*|ipq806x/*)
+	wifi_temp="$(awk '{printf("%.1f°C ", $0 / 1000)}' "$IEEE_PATH"/phy*/device/hwmon/hwmon*/temp1_input 2>"/dev/null" | awk '$1=$1')"
+	;;
+mediatek/mt7622)
+	wifi_temp="$(awk '{printf("%.1f°C ", $0 / 1000)}' "$IEEE_PATH"/wl*/hwmon*/temp1_input 2>"/dev/null" | awk '$1=$1')"
+	;;
+*)
+	wifi_temp="$(awk '{printf("%.1f°C ", $0 / 1000)}' "$IEEE_PATH"/phy*/hwmon*/temp1_input 2>"/dev/null" | awk '$1=$1')"
+	;;
+esac
+
+case "$DISTRIB_TARGET" in
+ipq40xx/*)
+	if [ -e "$IEEE_PATH/phy0/hwmon0/temp1_input" ]; then
+		mt76_temp="$(awk -F ': ' '{print $2}' "$IEEE_PATH/phy0/hwmon0/temp1_input" 2>"/dev/null")°C"
+	fi
+	[ -z "$mt76_temp" ] || wifi_temp="${wifi_temp:+$wifi_temp }$mt76_temp"
+	;;
+*)
+	cpu_temp="$(awk '{printf("%.1f°C", $0 / 1000)}' "$THERMAL_PATH/thermal_zone0/temp" 2>"/dev/null")"
+	;;
+esac
+
+if [ -n "$cpu_temp" ] && [ -z "$wifi_temp" ]; then
+	echo -n "CPU: $cpu_temp"
+elif [ -z "$cpu_temp" ] && [ -n "$wifi_temp" ]; then
+	echo -n "WiFi: $wifi_temp"
+elif [ -n "$cpu_temp" ] && [ -n "$wifi_temp" ]; then
+	echo -n "CPU: $cpu_temp, WiFi: $wifi_temp"
+else
+	echo -n "No temperature info"
+fi