🌴 Sync 2026-03-05 23:51:42

luci-app-systools/root/usr/libexec/systools.sh

@@ -0,0 +1,51 @@
+#!/bin/sh
+# Author Xiaobao(xiaobao@linkease.com)
+
+ACTION=${1}
+shift 1
+
+usage() {
+  echo "usage: $0 sub-command"
+  echo "where sub-command is one of:"
+  echo "      select_none                     Select action"
+  echo "      ipv6_pd                         Enable IPv6 (PD mode)"
+  echo "      ipv6_relay                      Enable IPv6 (Relay mode)"
+  echo "      ipv6_nat                        Enable IPv6 (NAT mode)"
+  echo "      ipv6_half                       Half IPv6 (Only Router)"
+  echo "      ipv6_off                        Disable IPv6"
+  echo "      disable-planb                   Diable planb"
+  echo "      reset_rom_pkgs                  Reset pkgs from rom"
+  echo "      qb_reset_password               Reset qBitorent password"
+  echo "      disk_power_mode                 Show disk power status"
+  echo "      speedtest                       Start a speedtest"
+}
+
+case "${ACTION}" in
+  "speedtest")
+    /usr/share/systools/speedtest.run ${1}
+  ;;
+  "ipv6_pd")
+    /usr/share/systools/ipv6.run pd
+  ;;
+  "ipv6_relay")
+    /usr/share/systools/ipv6.run relay
+  ;;
+  "ipv6_nat")
+    /usr/share/systools/ipv6.run nat
+  ;;
+  "ipv6_half")
+    /usr/share/systools/ipv6.run half
+  ;;
+  "ipv6_off")
+    /usr/share/systools/ipv6.run off
+  ;;
+  *)
+    if [ -n "${ACTION}" -a -s /usr/share/systools/${ACTION}.run ]; then
+      bash "/usr/share/systools/${ACTION}.run"
+    else
+      usage
+      exit 1
+    fi
+  ;;
+esac
+

luci-app-systools/root/usr/share/systools/disable-planb.run

@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "x$(uci -q get quickstart.main.disable_dhns)" = x1 ]; then
+    echo "Already disabled!"
+else
+    echo "Disabling..."
+    uci set quickstart.main.disable_dhns=1
+    uci commit quickstart
+    /etc/init.d/quickstart restart
+    echo "Done"
+fi

luci-app-systools/root/usr/share/systools/disable-wandrop.run

@@ -0,0 +1,4 @@
+#!/bin/sh
+
+/etc/init.d/wan_drop disable
+

luci-app-systools/root/usr/share/systools/disk_power_mode.run

@@ -0,0 +1,72 @@
+#!/bin/bash
+#function-1:显示硬盘盘符+Lable+容量以及硬盘上电状态
+#function-2:通过echo -e转义与if...elif...else语句使其active呈现红色,standby呈现绿色,方便快速检视硬盘上电情况
+#function-3:原for循环语句中加入判断和循环计数方式,统计active和standby的数量
+#function-4:增加 if 嵌套语句判断除开 active 和 standby 之外状态的硬盘，并将其标记为 unknown
+#function-5:将unknown状态的硬盘列举出来(对for语句上瘾了……
+
+dsk=`ls /dev/sd* | grep -Eo 'sd(a{2}|[a-z]+)$'`
+echo `date +%c`
+standby=0
+active=0
+unknown=0
+c=0
+
+if readlink /proc/$$/fd/1 2>/dev/null | grep -qF /dev/ ; then
+	highlight(){
+		echo -e "$1 $2 \033[0m"
+	}
+else
+	highlight(){
+		echo -e "$2"
+	}
+fi
+
+for i in $dsk;
+do
+echo -e "\n";
+echo -e "-----------------------";
+echo -n "/dev/$i : " ;
+stats=`smartctl -i -n standby /dev/$i|grep "mode"|awk '{print $4}' `;
+#echo $stats
+if [[ $stats == STANDBY ]]||[[ $stats == ACTIVE ]]||[[ $stats == IDLE_A ]]
+then
+   for s in $stats;
+   do
+   if [ $s == STANDBY ]
+   then
+      highlight "\033[30;42m" " STANDBY "
+      let standby=$standby+1
+   else
+      highlight "\033[37;41m" " ACTIVE "
+      let active=$active+1
+   fi
+   done
+else
+   highlight "\033[30;47m" " UNKNOWN "
+   let unknown=$unknown+1
+   for un in $i
+   do
+     list[c]=$un
+     ((c++))
+   done
+fi
+echo `lsblk /dev/$i|grep "/srv/dev-disk-by-label-"|awk '{print $7}' `;
+echo `lsblk /dev/$i|grep "/srv/dev-disk-by-label-"|awk '{print $4}' `;
+done
+
+echo -e "\n";
+highlight "\033[37;41m" "Active  Disk in Total=$active  ";
+highlight "\033[30;42m" "Standby Disk in Total=$standby  ";
+highlight "\033[30;47m" "Unknown Disk in Total=$unknown  ";
+#echo $c
+echo -e "Unknown Disk list: ";
+for((b=0;b<=$c;b++));
+do
+  if [[ $b -lt $c ]]
+  then
+  echo ${list[b]}
+  fi
+done
+echo -e "\n";
+exit

luci-app-systools/root/usr/share/systools/firewall.nat6

@@ -0,0 +1,143 @@
+# NAT6 + masquerading firewall script
+# https://github.com/akatrevorjay/openwrt-masq6
+# trevorj <github@trevor.joynson.io>
+#
+# You can configure in /etc/config/firewall per zone:
+# * IPv4 masquerading
+#     option masq 1
+# * IPv6 masquerading
+#     option masq6 1
+# * IPv6 privacy extensions
+#     option masq6_privacy 1
+ 
+set -e -o pipefail
+ 
+. /lib/functions.sh
+. /lib/functions/network.sh
+. /usr/share/libubox/jshn.sh
+ 
+log() {
+    logger -t nat6 -s "${@}"
+}
+ 
+get_ula_prefix() {
+    uci get network.globals.ula_prefix
+}
+ 
+validate_ula_prefix() {
+    local ula_prefix="${1}"
+    if [ $(echo "${ula_prefix}" | grep -c -E -e "^([0-9a-fA-F]{4}):([0-9a-fA-F]{0,4}):") -ne 1 ] ; then
+        log "Fatal error: IPv6 ULA ula_prefix=\"${ula_prefix}\" seems invalid. Please verify that a ula_prefix is set and valid."
+        return 1
+    fi
+}
+ 
+ip6t() {
+    ip6tables "${@}"
+}
+ 
+ip6t_add() {
+    if ! ip6t -C "${@}" &> /dev/null; then
+        ip6t -I "${@}"
+    fi
+}
+ 
+nat6_init() {
+    iptables-save -t nat \
+    | sed -e "
+        /\sMASQUERADE$/d
+        /\s[DS]NAT\s/d
+        /\s--match-set\s\S*/s//\06/
+        /,BROADCAST\s/s// /" \
+    | grep -v FULLCONENAT \
+    | ip6tables-restore -T nat
+}
+ 
+masq6_network() {
+    # ${config} contains the ID of the current section
+    local network_name="${1}"
+ 
+    local device
+    network_get_device device "${network_name}" || return 0
+ 
+    local done_net_dev
+    for done_net_dev in ${DONE_NETWORK_DEVICES}; do
+        if [ "${done_net_dev}" = "${device}" ]; then
+            log "Already configured device=\"${device}\", so leaving as is."
+            return 0
+        fi
+    done
+ 
+    log "Found device=\"${device}\" for network_name=\"${network_name}\"."
+ 
+    if [ "${zone_masq6_privacy}" -eq 1 ]; then
+        log "Enabling IPv6 temporary addresses for device=\"${device}\"."
+ 
+        log "Accepting router advertisements on ${device} even if forwarding is enabled (required for temporary addresses)"
+        echo 2 > "/proc/sys/net/ipv6/conf/${device}/accept_ra" \
+        || log "Error: Failed to change router advertisements accept policy on ${device} (required for temporary addresses)"
+ 
+        log "Using temporary addresses for outgoing connections on interface ${device}"
+        echo 2 > "/proc/sys/net/ipv6/conf/${device}/use_tempaddr" \
+        || log "Error: Failed to enable temporary addresses for outgoing connections on interface ${device}"
+    fi
+ 
+    append DONE_NETWORK_DEVICES "${device}"
+}
+ 
+handle_zone() {
+    # ${config} contains the ID of the current section
+    local config="${1}"
+ 
+    local zone_name
+    config_get zone_name "${config}" name
+ 
+    # Enable masquerading via NAT6
+    local zone_masq6
+    config_get_bool zone_masq6 "${config}" masq6 0
+ 
+    log "Firewall config=\"${config}\" zone=\"${zone_name}\" zone_masq6=\"${zone_masq6}\"."
+ 
+    if [ "${zone_masq6}" -eq 0 ]; then
+        return 0
+    fi
+ 
+    # IPv6 privacy extensions: Use temporary addrs for outgoing connections?
+    local zone_masq6_privacy
+    config_get_bool zone_masq6_privacy "${config}" masq6_privacy 1
+ 
+    log "Found firewall zone_name=\"${zone_name}\" with zone_masq6=\"${zone_masq6}\" zone_masq6_privacy=\"${zone_masq6_privacy}\"."
+ 
+    log "Setting up masquerading nat6 for zone_name=\"${zone_name}\" with zone_masq6_privacy=\"${zone_masq6_privacy}\""
+ 
+    local ula_prefix="$(get_ula_prefix)"
+    validate_ula_prefix "${ula_prefix}" || return 1
+ 
+    local postrouting_chain="zone_${zone_name}_postrouting"
+    log "Ensuring ip6tables chain=\"${postrouting_chain}\" contains our MASQUERADE."
+    ip6t_add "${postrouting_chain}" -t nat \
+        -m comment --comment "!fw3" -j MASQUERADE
+ 
+    local input_chain="zone_${zone_name}_input"
+    log "Ensuring ip6tables chain=\"${input_chain}\" contains our permissive DNAT rule."
+    ip6t_add "${input_chain}" -t filter -m conntrack --ctstate DNAT \
+        -m comment --comment "!fw3: Accept port forwards" -j ACCEPT
+ 
+    local forward_chain="zone_${zone_name}_forward"
+    log "Ensuring ip6tables chain=\"${forward_chain}\" contains our permissive DNAT rule."
+    ip6t_add "${forward_chain}" -t filter -m conntrack --ctstate DNAT \
+        -m comment --comment "!fw3: Accept port forwards" -j ACCEPT
+ 
+    local DONE_NETWORK_DEVICES=""
+    config_list_foreach "${config}" network masq6_network
+ 
+    log "Done setting up nat6 for zone=\"${zone_name}\" on devices: ${DONE_NETWORK_DEVICES}"
+}
+ 
+main() {
+    nat6_init
+    config_load firewall
+    config_foreach handle_zone zone
+}
+ 
+main "${@}"

luci-app-systools/root/usr/share/systools/fw_wxedge.run

@@ -0,0 +1,16 @@
+#!/bin/sh
+
+uci -q batch <<-EOF >/dev/null
+    delete firewall.wxedge
+    set firewall.wxedge=rule
+    set firewall.wxedge.name="wxedge"
+    set firewall.wxedge.target="ACCEPT"
+    set firewall.wxedge.src="wan"
+    set firewall.wxedge.dest_port="40000-65535"
+    set firewall.wxedge.enabled="1"
+    commit firewall
+EOF
+
+/etc/init.d/firewall reload
+
+echo "done"

luci-app-systools/root/usr/share/systools/ipv6.run

@@ -0,0 +1,243 @@
+#!/bin/sh
+# Copyright (C) 2025 iStoreOS, jjm2473@gmail.com
+
+LEVEL_PD=pd
+LEVEL_RELAY=relay
+LEVEL_NAT=nat
+LEVEL_HALF=half
+LEVEL_OFF=off
+
+MODE_SERVER=server
+MODE_RELAY=relay
+MODE_CLIENT=client
+MODE_DISABLE=disable
+
+FROM_PD=pd
+FROM_ULA=ula
+FROM_NONE=none
+
+ODHCPD_NDP_BUG=false
+
+ipv6_enable_nat() {
+	uci -q set network.wan6.sourcefilter=0
+	uci -q delete firewall.nat6
+	uci -q set firewall.nat6="include"
+	uci -q set firewall.nat6.path="/usr/share/systools/firewall.nat6"
+	uci -q set firewall.nat6.reload="1"
+	uci -q set firewall.nat6.fw4_compatible="0"
+	uci -q set firewall.@zone[1].masq6="1"
+	uci -q set firewall.@zone[1].masq6_privacy="0"
+	uci commit firewall
+	/etc/init.d/firewall reload
+}
+
+ipv6_disable_nat() {
+	NAT6=`uci -q get firewall.nat6.reload`
+	if [ "$NAT6" = "1" ]; then
+		uci -q delete network.wan6.sourcefilter
+		uci -q delete firewall.@zone[1].masq6
+		uci -q delete firewall.nat6
+		uci commit firewall
+		/etc/init.d/firewall reload
+	fi
+}
+
+ipv6_set_lan_addr() {
+	local addr=$1
+	uci -q batch <<-EOF >/dev/null
+		del network.lan.delegate
+		del network.lan.ip6class
+	EOF
+	case "$addr" in
+	$FROM_PD)
+		uci -q set network.lan.ip6assign='60'
+		if $ODHCPD_NDP_BUG; then
+			uci -q batch <<-EOF >/dev/null
+				add_list network.lan.ip6class='wan6'
+				add_list network.lan.ip6class='wan_6'
+				add_list network.lan.ip6class='wan'
+			EOF
+		fi
+	;;
+	$FROM_ULA)
+		uci -q set network.lan.ip6assign='60'
+		if $ODHCPD_NDP_BUG; then
+			uci -q add_list network.lan.ip6class='local'
+		fi
+	;;
+	$FROM_NONE)
+		uci -q del network.lan.ip6assign
+	;;
+	esac
+}
+
+ipv6_set_lan_mode() {
+	local mode=$1
+	if [ "$MODE_CLIENT" = "$mode" ]; then
+		uci -q batch <<-EOF >/dev/null
+			set network.lan6='interface'
+			del network.lan6.auto
+			set network.lan6.proto='dhcpv6'
+			set network.lan6.device='@lan'
+		EOF
+	else
+		uci -q set network.lan6.auto='0'
+	fi
+
+	case "$mode" in
+	$MODE_SERVER)
+		uci -q batch <<-EOF >/dev/null
+			set dhcp.lan.dhcpv6='server'
+			set dhcp.lan.ra='server'
+			del dhcp.lan.ra_slaac
+			del dhcp.lan.ra_flags
+			add_list dhcp.lan.ra_flags='managed-config'
+			add_list dhcp.lan.ra_flags='other-config'
+			del dhcp.lan.ndp
+		EOF
+		;;
+	$MODE_RELAY)
+		uci -q batch <<-EOF >/dev/null
+			set dhcp.lan.ra='relay'
+			del dhcp.lan.ra_slaac
+			del dhcp.lan.ra_flags
+			set dhcp.lan.dhcpv6='relay'
+			set dhcp.lan.ndp='relay'
+		EOF
+		;;
+	*)
+		uci -q batch <<-EOF >/dev/null
+			del dhcp.lan.ra
+			del dhcp.lan.ra_slaac
+			del dhcp.lan.ra_flags
+			del dhcp.lan.dhcpv6
+			del dhcp.lan.ndp
+		EOF
+		;;
+	esac
+}
+
+ipv6_set_wan_relay() {
+	local relay_src=$1
+	local iface
+	for iface in wan wan6; do
+		if [ $iface = "$relay_src" ]; then
+			uci -q batch <<-EOF >/dev/null
+				set dhcp.$iface=dhcp
+				set dhcp.$iface.interface='$iface'
+				set dhcp.$iface.ignore='1'
+				set dhcp.$iface.master='1'
+				set dhcp.$iface.ra='relay'
+				set dhcp.$iface.dhcpv6='relay'
+				set dhcp.$iface.ndp='relay'
+			EOF
+		else
+			uci -q batch <<-EOF >/dev/null
+				del dhcp.$iface.master
+				del dhcp.$iface.ra
+				del dhcp.$iface.dhcpv6
+				del dhcp.$iface.ndp
+			EOF
+		fi
+	done
+}
+
+is_lan_gateway() {
+	[ "$(uci -q get network.lan.defaultroute)" = "0" ] && return 1
+	[ "$(uci -q get network.lan.proto)" = "dhcp" ] && return 0
+	[ "$(uci -q get network.lan.proto)" = "static" ] || return 1
+	[ -n "$(uci -q get network.lan.gateway)" ]
+}
+
+is_wan_pppoe() {
+	[ "$(uci -q get network.wan.proto)" = "pppoe" ]
+}
+
+level=$1
+[ -n "$level" ] || level=$LEVEL_PD
+
+echo "Try Level $level"
+
+odhcpd_version=$(grep -o 'Version: [0-9]*' /usr/lib/opkg/info/odhcpd-ipv6only.control | cut -d' ' -f2)
+if [ -n "$odhcpd_version" -a "$odhcpd_version" -lt 2025 ]; then
+	echo "odhcpd version $odhcpd_version detected, enabling NDP bug workaround"
+	ODHCPD_NDP_BUG=true
+fi
+
+# nat
+if [ "$level" = $LEVEL_NAT ]; then
+	if opkg status kmod-ipt-nat6 | grep '^Status: ' | grep -Fwq installed ; then
+		echo "kmod-ipt-nat6 found"
+	else
+		echo "kmod-ipt-nat6 not found, installing"
+		opkg update
+		opkg install kmod-ipt-nat6 || exit 1
+	fi
+	ipv6_enable_nat
+else
+	# disable ipv6 nat
+	ipv6_disable_nat
+fi
+
+# dns
+if [ "$level" = $LEVEL_OFF ]; then
+	uci -q set 'dhcp.@dnsmasq[0].filter_aaaa=1'
+else
+	uci -q del 'dhcp.@dnsmasq[0].filter_aaaa'
+fi
+
+# address service
+if [ "$level" = $LEVEL_OFF ]; then
+	ipv6_set_lan_mode $MODE_DISABLE
+	ipv6_set_lan_addr $FROM_NONE
+	ipv6_set_wan_relay none
+	uci -q set network.wan.ipv6=0
+	uci -q set network.wan6.auto=0
+else
+	if is_lan_gateway; then
+		echo "Single-Port Router (LAN Gateway) mode"
+		ipv6_set_lan_mode $MODE_CLIENT
+		ipv6_set_lan_addr $FROM_NONE
+	else
+		if is_wan_pppoe; then
+			echo "PPPoE mode"
+			uci -q del network.wan.ipv6
+			ipv6_set_wan_relay wan
+		else
+			echo "DHCP-Client mode"
+			uci -q del network.wan6.auto
+			ipv6_set_wan_relay wan6
+		fi
+		if [ "$level" = $LEVEL_PD -o "$level" = $LEVEL_NAT ]; then
+			ipv6_set_lan_mode $MODE_SERVER
+		elif [ "$level" = $LEVEL_RELAY ]; then
+			ipv6_set_lan_mode $MODE_RELAY
+		else
+			ipv6_set_lan_mode $MODE_DISABLE
+		fi
+		if [ "$level" = $LEVEL_PD ]; then
+			ipv6_set_lan_addr $FROM_PD
+		elif [ "$level" = $LEVEL_NAT ]; then
+			# uci set network.globals.ula_prefix="$(uci get network.globals.ula_prefix | sed 's/^./d/')"
+			ipv6_set_lan_addr $FROM_ULA
+		else
+			ipv6_set_lan_addr $FROM_NONE
+		fi
+		if [ "$level" = $LEVEL_NAT ]; then
+			uci set dhcp.lan.ra_default='2'
+		else
+			uci -q del dhcp.lan.ra_default
+		fi
+	fi
+fi
+
+uci -q batch <<-EOF >/dev/null
+	commit dhcp
+	commit network
+EOF
+
+/etc/init.d/odhcpd reload
+/etc/init.d/dnsmasq reload
+/etc/init.d/network reload
+
+echo "Done"

luci-app-systools/root/usr/share/systools/istore-reinstall.run

@@ -0,0 +1,25 @@
+#!/bin/sh
+ISTORE_REPO=https://istore.istoreos.com/repo/all/store
+FCURL="curl --fail --show-error"
+
+curl -V >/dev/null 2>&1 || {
+  echo "prereq: install curl"
+  opkg info curl | grep -Fqm1 curl || opkg update
+  opkg install curl
+}
+
+IPK=`$FCURL "$ISTORE_REPO/Packages.gz" | zcat | grep -m1 '^Filename: luci-app-store.*\.ipk$' | sed -n -e 's/^Filename: \(.\+\)$/\1/p'`
+
+[ -n "$IPK" ] || exit 1
+
+$FCURL "$ISTORE_REPO/$IPK" | tar -xzO ./data.tar.gz | tar -xzO ./bin/is-opkg > /tmp/is-opkg
+
+[ -s "/tmp/is-opkg" ] || exit 1
+
+chmod 755 /tmp/is-opkg
+/tmp/is-opkg update
+# /tmp/is-opkg install taskd
+/tmp/is-opkg opkg install --force-reinstall luci-lib-taskd luci-lib-xterm
+/tmp/is-opkg opkg install --force-reinstall luci-app-store || exit $?
+[ -s "/etc/init.d/tasks" ] || /tmp/is-opkg opkg install --force-reinstall taskd
+[ -s "/usr/lib/lua/luci/cbi.lua" ] || /tmp/is-opkg opkg install luci-compat >/dev/null 2>&1

luci-app-systools/root/usr/share/systools/jellyfin_host.run

@@ -0,0 +1,46 @@
+#!/bin/sh
+# @jjm2473
+
+hosts() {
+    cat <<-EOF
+api.themoviedb.org 13.35.67.86
+image.tmdb.org 104.16.61.155
+www.themoviedb.org 54.192.151.79
+EOF
+}
+
+filter() {
+    local EXISTED=`uci show dhcp | grep -E '^dhcp\.@domain\[\d+\]\.name=' | sed 's/.*=//g'"; s/'//g" | sort -u`
+    if [ "x$EXISTED" = "x" ]; then
+    	cat
+    else
+	    grep -vFwe "$EXISTED"
+    fi
+}
+add_host() {
+    [ "x$1" = "x" -o "x$2" = "x" ] && return
+    echo "set $1 = $2"
+    uci -q batch <<-EOF >/dev/null
+        add dhcp domain
+        set dhcp.@domain[-1].name=$1
+        set dhcp.@domain[-1].ip=$2
+EOF
+}
+add_hosts() {
+    local line
+    while read; do
+        line="$REPLY"
+        add_host $line
+    done
+    if [ -n "`uci changes dhcp`" ]; then
+        echo "commit changes and reload dnsmasq"
+        uci commit dhcp
+        /etc/init.d/dnsmasq reload
+    else
+        echo "there is nothing to do"
+    fi
+}
+
+hosts | filter | add_hosts
+
+echo "done"

luci-app-systools/root/usr/share/systools/net_check.run

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+date
+
+nslookup baidu.com
+
+ping -c 4 baidu.com
+
+curl -o /dev/null https://www.baidu.com/

luci-app-systools/root/usr/share/systools/openssl-aes256gcm.run

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+openssl speed -evp aes-256-gcm
+

luci-app-systools/root/usr/share/systools/openssl-chacha20-poly1305.run

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+openssl speed -evp chacha20-poly1305
+

luci-app-systools/root/usr/share/systools/qb_reset_password.run

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+profile=`uci get qbittorrent.main.profile`
+if [ -n "$profile" ]; then
+    echo "qb profile: $profile"
+    echo "stop qb"
+    /etc/init.d/qbittorrent stop
+    sleep 2
+    echo "delete password"
+    sed -i '/^WebUI\\Password_/d' "$profile/qBittorrent/config/qBittorrent.conf"
+    echo "start qb"
+    /etc/init.d/qbittorrent start
+else
+    echo "profile not defined!"
+fi
+
+echo "done"

luci-app-systools/root/usr/share/systools/reinstall_incompatible_kmods.run

@@ -0,0 +1,23 @@
+#!/bin/sh
+# Copyright (C) 2025 jjm2473@gmail.com
+
+(
+	cd /usr/lib/opkg/info
+	grep -lm1 '^Version: 0.0.0-r1$' kmod-*.control 2>/dev/null | sed 's/.control$//'
+) > /tmp/incompat_kmods.txt
+
+if [ -s /tmp/incompat_kmods.txt ]; then
+	echo "The following incompatible kernel modules were found:"
+	cat /tmp/incompat_kmods.txt
+	echo "=====END====="
+	echo "Try installing from opkg"
+	opkg update
+	opkg install $(cat /tmp/incompat_kmods.txt)
+	rm -f /tmp/incompat_kmods.txt
+	echo "If you encounter network problems, please try again"
+	echo "If it says some packages are unknown, it may be because they have been removed. Just ignore it."
+else
+	echo "No incompatible kernel modules found"
+fi
+
+echo "Done"

luci-app-systools/root/usr/share/systools/reset_rom_pkgs.run

@@ -0,0 +1,64 @@
+#!/bin/sh
+
+nonconf_files_of_pkg() {
+    local pkgname="$1"
+    if [ -s /rom/usr/lib/opkg/info/${pkgname}.conffiles ]; then
+        grep -hvxFf /rom/usr/lib/opkg/info/${pkgname}.conffiles \
+            /rom/usr/lib/opkg/info/${pkgname}.list
+    else
+        cat /rom/usr/lib/opkg/info/${pkgname}.list
+    fi
+}
+
+reset_pkg() {
+    local pkgname="$1"
+    local line
+    local dep
+    local deps
+    echo "${pkgname}" | grep -q '^kernel$
+^libc$
+^libgcc1$
+^libatomic1$
+^busybox$' && return
+    if [ -f /rom/usr/lib/opkg/info/${pkgname}.control -a \
+            \( -e /overlay/upper/usr/lib/opkg/info/${pkgname}.control -o \
+             -e /ext_overlay/upper/usr/lib/opkg/info/${pkgname}.control \) ]; then
+        echo "reset ${pkgname}"
+        if [ -f /rom/usr/lib/opkg/info/${pkgname}.list ]; then
+            nonconf_files_of_pkg "${pkgname}" | while read; do
+		        line="$REPLY"
+                rm -f "/overlay/upper/${line}" "/ext_overlay/upper/${line}"
+            done
+            rm -f /overlay/upper/usr/lib/opkg/info/${pkgname}.list /ext_overlay/upper/usr/lib/opkg/info/${pkgname}.list
+        fi
+        deps=`grep '^Depends: ' /rom/usr/lib/opkg/info/${pkgname}.control | sed -e 's/^Depends: //' -e 's/ ([^)]*)//g' -e 's/,/ /g'`
+        # avoid loop deps
+        rm -f /overlay/upper/usr/lib/opkg/info/${pkgname}.control /ext_overlay/upper/usr/lib/opkg/info/${pkgname}.control
+        for dep in $deps ; do
+            reset_pkg "$dep"
+        done
+        rm -f /overlay/upper/usr/lib/opkg/info/${pkgname}.* /ext_overlay/upper/usr/lib/opkg/info/${pkgname}.*
+    fi
+}
+
+ls_all_rom_pkgs() {
+	( cd /rom/usr/lib/opkg/info ; find . -maxdepth 1 -name '*.control' | sed -E 's#./(.*).control#\1#g' )
+}
+
+reset_all_rom() {
+    local line
+    ls_all_rom_pkgs | while read; do
+        line="$REPLY"
+        reset_pkg "$line"
+    done
+}
+
+reset_all_rom
+
+touch /overlay/upper/usr/lib/opkg/.upgrading
+
+echo "done, please reboot, it will reboot in 10s"
+
+sleep 10
+reboot
+

luci-app-systools/root/usr/share/systools/select_none.run

@@ -0,0 +1,4 @@
+#!/bin/sh
+
+echo "Please select action to run!"
+

luci-app-systools/root/usr/share/systools/speedtest-servers.run

@@ -0,0 +1,34 @@
+#!/bin/sh
+
+export PATH=/usr/bin:/sbin:/bin/usr/bin:/sbin:/bin
+export HOME=/root
+export GATEWAY_INTERFACE=
+export REMOTE_HOST=
+export REMOTE_ADDR=
+export SHLVL=
+export QUERY_STRING=
+export HTTP_USER_AGENT=
+export DOCUMENT_ROOT=
+export REMOTE_PORT=
+export HTTP_ACCEPT=
+export SCRIPT_FILENAME=
+export HTTP_HOST=
+export REQUEST_URI=
+export SERVER_SOFTWARE=
+export HTTP_CONNECTION=
+export HTTP_COOKIE=
+export HTTP_ACCEPT_LANGUAGE=
+export SERVER_PROTOCOL=
+export HTTP_ACCEPT_ENCODING=
+export PATH_INFO=
+export REDIRECT_STATUS=
+export REQUEST_METHOD=
+export SERVER_ADDR=
+export PWD=
+export SERVER_PORT=
+export SCRIPT_NAME=
+export SERVER_NAME=
+export TERM=screen-256color
+
+/usr/bin/speedtest --format=json --accept-license --accept-gdpr --servers 2>/dev/null
+

luci-app-systools/root/usr/share/systools/speedtest.run

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+cd /root
+export HOME=/root
+SERVER=${1}
+
+echo "run speedtest"
+if [ "$SERVER" == "auto" ]; then
+  echo "/usr/bin/speedtest"
+  echo "yes"|/usr/bin/speedtest
+else
+  echo "/usr/bin/speedtest -s $SERVER"
+  echo "yes"|/usr/bin/speedtest -s $SERVER
+fi
+