🍉 Sync 2026-05-13 08:40:30

modeminfo/root/usr/share/modeminfo-qmi/modeminfo-qmi

@@ -1,180 +0,0 @@
-# qmi addon for luci-app-modeminfo
-# require full version libqmi (need build in SDK)
-# (c) 2020-2024 written by Konstantine Shevlakov (c) at <shevlakov@132lan.ru>
-
-get_device_info(){
-	DEVPORT=$(uci -q get modeminfo.@modeminfo[$s].device_qmi)
-	DEVCTL=$(echo $DEVPORT | awk -F [\/] '{print $NF}')
-	if [ -x /usr/bin/qmicli ]; then
-		export QMICTL="qmicli -p -d $DEVPORT"
-	else
- 		logger -t "luci-app-modeminfo" "qmicli not found!"
-		exit 1
-        fi
-	if [ $DEVPORT ]; then
-		QPROXY=$(uci -q get modeminfo.@modeminfo[$s].qmi_proxy)
-                if [ $QPROXY -eq 1 ]; then           
-                        export QMICTL="qmicli -p -d $DEVPORT"
-                else                              
-                        export QMICTL="qmicli -d $DEVPORT"   
-                fi
-	else
-	       	for qmi in $(ls /dev/cdc-wdm*); do
-                	if [ $qmi ]; then
-               	        	QMI_DEVICE=$qmi
-	               	        if [ -n $(which qmicli) ]; then
-                        	        export QMICTL="qmicli -p -d ${QMI_DEVICE}"
-	               	        else
-	                                logger -t "luci-app-modeminfo" "qmi-utils not found or installed!"
-        	                        exit 0
-	               	        fi
-	                else
-        	                logger -t "luci-app-modeminfo" "Device is no QMI mode or not found!"
-               		        exit 0
-	                fi
-        	done
-		if [ $qmi ]; then
-			uci set modeminfo.@modeminfo[0].device_qmi="$qmi"
-			uci commit modeminfo
-			break
-		fi
-	fi	
-}
-
-
-get_hardware_info(){
-        MANUF=$(cat $(readlink -f /sys/class/usbmisc/${DEVCTL})/../../../manufacturer)
-        MODEL="$(cat $(readlink -f /sys/class/usbmisc/${DEVCTL})/../../../product)"
-
-	if [ -n "$(echo "${MODEL}" | grep -Ei "${MANUF}")" ] || [  -n "$(echo "${MANUF}" | grep -Ei QUAL)" ]; then
-		DEVICE="${MODEL}"
-	else
-	        DEVICE="${MANUF} ${MODEL}"
-	fi
-
-        IMEI=`$QMICTL --dms-get-ids | awk -F [:] '/IMEI:/{gsub("'\''|\*", ""); print $2}'`
-	FW=$($QMICTL --dms-get-software-version | awk -F [:] '/version:/{print $2}' )
-	ICCID=$($QMICTL --dms-uim-get-iccid | awk -F [:] '/ICCID/{gsub("'\''",""); print $2}' )
-}
-
-get_lte_bw(){                                                                                                                                               
-        case $BWDx in                                                                                                                                       
-                3) BWDL=1 ;;                                                                                                                                
-                5) BWDL=2 ;;                                                                                                                                
-                10) BWDL=3 ;;                                                                                                                               
-                15) BWDL=4 ;;                                                                                                                               
-                20) BWDL=5 ;;                                                                                                                               
-        esac                                                                                                                                                
-}
-
-get_signal_info(){
-        NETWORK=`$QMICTL --nas-get-home-network | awk -F [:] '/MCC|MNC|Description/{gsub("'\''|^ ", "");print $2}'`
-        COPS_MCC=$(echo ${NETWORK} |awk '{print $1}')
-        COPS_MNC_RAW=$(echo ${NETWORK} |awk '{print $2}')
-        if [ $COPS_MNC_RAW -lt 10 ]; then
-                COPS_MNC=0${COPS_MNC_RAW}
-        else
-		COPS_MNC=$COPS_MNC_RAW
-	fi
-        COPS="$(echo "${NETWORK}" |tail -1)"
-	SIGNAL=$($QMICTL --nas-get-signal-info)
-        MODE=$(echo "$SIGNAL" | awk 'NR ==2{gsub("\:", ""); print $1}')
-        STRENGTH=$(echo "$SIGNAL" | awk '/RSSI|RSRQ|RSRP|SNR|ECIO/{gsub("'\''",""); print $2}')
-	SERVING=$($QMICTL --nas-get-serving-system)
-	RFBAND=$($QMICTL --nas-get-rf-band-info)
-        if  [ $MODE == "LTE" ]; then
-		MIMO=$($QMICTL --nas-get-tx-rx-info=lte | grep 'RX Chain' | wc -l)
-		LACTAC=$(echo "$SERVING" | awk -F [:] '/tracking area code:|3GPP cell ID:/{gsub("'\''",""); print $2}')
-		LAC_NUM=$(echo $LACTAC | awk '{print $2}')
-		CID_NUM=$(echo $LACTAC | awk '{print $1}')
-		CID=$(echo $CID_NUM | awk '{printf "%x\n", $1}' |awk '{print toupper($1)}')
-		LAC=$(echo $LAC_NUM | awk '{printf "%x\n", $1}' |awk '{print toupper($1)}')
-                CSQ_RSSI=$(echo ${STRENGTH} | awk '{print $1}')
-                RSRQ=$(echo ${STRENGTH} | awk '{print $2}')
-                RSRP=$(echo ${STRENGTH} | awk '{print $3}')
-                SINR=$(echo ${STRENGTH} | awk '{printf "%.0f\n", $4}')
-		ENBx=$(echo $CID | sed -e 's/..$//')
-		ENBID=$(printf %d 0x$ENBx)
-		CELL=$(printf %d 0x${CID: -2})
-		PCI=$($QMICTL --nas-get-cell-location-info | awk -F [:] '/Serving Cell ID:/{gsub("'\''",""); print $2}')
-		LTE_O=$($QMICTL --nas-get-lte-cphy-ca-info)
-	        LTE_CA=$(echo "$LTE_O" |grep -i '^secondary cell' | wc -l)
-		BWDx=$(echo "$LTE_O" | grep -A4 'Primary Cell Info' | awk -F [:] '/DL Bandwidth:/{gsub("'\''| ", ""); print $2}')
-		get_lte_bw
-		if [ $LTE_CA -ge 1 ]; then
-			BWC=$(echo "$LTE_O" | grep -A4 '^Secondary Cell' | awk -F [:] '/DL Bandwidth:/{gsub("'\''| ", ""); printf "+"$2}')
-                        BWCA=$(($BWDx$BWC))
-			BANDCH=$(echo "$LTE_O" | grep -A4 '^Primary Cell' | awk -F [:] '/RX Channel:/{gsub("'\''| ", ""); print $2}')
-			# Fix qmicli band T77W968 modem
-			case $DEVICE in
-				*Dell*|*LN960*) CA=$(echo "$LTE_O" | grep -A4 '^Secondary Cell' | awk -F [:-]  '/LTE Band:/{gsub("'\''| ", ""); printf " "$NF-1}') ;;
-				*) CA=$(echo "$LTE_O" | grep -A4 '^Secondary Cell' | awk -F [:-]  '/LTE Band:/{gsub("'\''| ", ""); print $NF}') ;;
-			esac
-			for cc in $CA; do
-				SCC=$SCC+$cc
-			done
-		else
-			BANDCH=$(echo "$RFBAND" |  awk -F [:] '/Active Channel:/{gsub("'\''",""); print $2}' | head -1)
-			if [ "x" == "x$BWDx" ]; then                                                                                                        
-                                BWDx=$(echo "$RFBAND" | awk -F [:] '/Bandwidth:/{gsub("'\''| ",""); print $2}' | tail -1)                                   
-                                get_lte_bw                                                                                                                  
-                        fi
-		fi	
-		EARFCN=$BANDCH
-        else
-		MIMO=$($QMICTL --nas-get-tx-rx-info=umts | grep 'RX Chain' | wc -l)
-		case $MIMO in
-			0) MIMO=$($QMICTL --nas-get-tx-rx-info=gsm | grep 'RX Chain' | wc -l) ;;
-		esac
-		LACTAC=$(echo "$SERVING" | awk -F [:] '/3GPP location area code:|3GPP cell ID:/{gsub("'\''",""); print $2}')
-		LAC_NUM=$(echo $LACTAC | awk '{print $1}')
-                CID_NUM=$(echo $LACTAC | awk '{print $2}')
-		LAC=$(echo $LAC_NUM | awk '{printf "%x\n", $1}' |awk '{print toupper($1)}')
-		CID=$(echo $CID_NUM | awk '{printf "%x\n", $1}' |awk '{print toupper($1)}')
-                CSQ_RSSI=$(echo ${STRENGTH} | awk '{print $1}')
-		if [ $(echo  ${STRENGTH} | awk '{print$2}') ]; then
-	                SINR=$(echo ${STRENGTH} | awk '{printf "%.0f\n", $2}')
-		fi
-		BANDCH=$(echo "$RFBAND" |  awk -F [:] '/Active Channel:/{gsub("'\''| ",""); print $2}')
-		EARFCN=$(echo $BANDCH | awk '{print $2}')
-		
-        fi
-        CSQ_PER=$(echo $CSQ_RSSI |awk '{printf "%d\n", (100*(1-(-50 - $1)/(-50 - -120)))}')
-        [ $CSQ_RSSI -ge -110 ] && CSQ_COL="black"
-        [ $CSQ_RSSI -ge -105 ] && CSQ_COL="red"
-        [ $CSQ_RSSI -ge -95 ] && CSQ_COL="orange"
-        [ $CSQ_RSSI -ge -75 ] && CSQ_COL="green"
-        if [ $CSQ_PER -gt 100 ]; then
-                CSQ_PER=100
-        elif [ $CSQ_PER -lt 0 ]; then
-                CSQ_PER=0
-        fi
-        EARFCN=$BANDCH
-	DISTANCE=$($QMICTL --nas-get-cell-location-info | awk '/LTE Timing Advance:/{gsub("\047",""); printf "%.2f\n", (299792458*($4*10^-6)/1000)/2}')
-        REG=$(echo "$SERVING" | awk -F [:] '/Registration state:/{print $2}' | sed "s/'//g" | awk '{print $1}')
-        case $REG in
-                registered)
-                        REGST=1
-                ;;
-		registration-denied)
-			REGST=3
-		;;
-        esac
-	DECIMAL=$(uci -q get modeminfo.@general[0].decimail)
-	if [ "x${DECIMAL}" != "x" ]; then
-                LAC=$(printf %d 0x$LAC_NUM)
-                CID=$(printf %d 0x$CID_NUM)
-        fi
-}
-
-
-#get_device
-function get_data_in(){
-        get_hardware_info >/dev/null 2>&1
-        get_signal_info >/dev/null 2>&1
-}
-
-get_hwinfo(){
-	continue
-}
-

modeminfo/root/usr/share/modeminfo-qmi/modeminfo-qmi.uqmi

@@ -1,176 +0,0 @@
-#!/bin/sh
-
-get_device_info(){
-	DEVPORT=$(uci -q get modeminfo.@modeminfo[0].device_qmi)
-	DEVCTL=$(echo $DEVPORT | awk -F [\/] '{print $NF}')
-	if ! [ -x /sbin/uqmi ]; then
- 		logger -t "luci-app-modeminfo" "uqmi not found!"
-		exit 1
-        fi
-	if [ $DEVPORT ]; then
-		QPROXY=$(uci -q get modeminfo.@modeminfo[0].qmi_proxy)
-                if [ "x${QPROXY}" = "x" ]; then           
-                        export MBIM=""
-                else                              
-                        export MBIM="-m"   
-                fi
-	else
-	       	for qmi in $(ls /dev/cdc-wdm*); do
-                	if [ $qmi ]; then
-               	        	QMI_DEVICE=$qmi
-	               	        if ! [ -n $(which uqmi) ]; then
-	                                logger -t "luci-app-modeminfo" "uqmi not found or installed!"
-        	                        exit 0
-	               	        fi
-	                else
-        	                logger -t "luci-app-modeminfo" "Device is no QMI mode or not found!"
-               		        exit 0
-	                fi
-        	done
-		if [ $qmi ]; then
-			uci set modeminfo.@modeminfo[0].device_qmi="$qmi"
-			uci commit modeminfo
-			break
-		fi
-	fi	
-}
-
-get_data(){
-	case $1 in
-		hw)
-			uqmi ${MBIM} -s -d ${DEVPORT} --get-imei
-		;;
-		net)
-			uqmi ${MBIM} -s -d ${DEVPORT} \
-				--get-serving-system 
-		;;
-		sig)
-			uqmi ${MBIM} -s -d ${DEVPORT} \
-				--get-signal-info 
-		;;
-		lte)
-			uqmi ${MBIM} -d ${DEVPORT} \
-				--get-lte-cphy-ca-info
-		;;
-		base)
-			uqmi ${MBIM} -s -d ${DEVPORT} \
-				--get-system-info
-		;;
-		mimo)
-			uqmi ${MBIM} -s -d ${DEVPORT} \
-				--nas-get-tx-rx-info=$MODE
-		;;
-		sta)
-			uqmi ${MBIM} -d ${DEVPORT} \
-				--get-cell-location-info
-		;;
-	esac
-	killall -9 uqmi >/dev/null 2>&1
-}
-
-get_hardware_info(){
-	DATA=$(get_data hw)
-	MANUF=$(cat $(readlink -f /sys/class/usbmisc/${DEVCTL})/../../../manufacturer)
-	MODEL="$(cat $(readlink -f /sys/class/usbmisc/${DEVCTL})/../../../product)"
-	DEVICE="$MANUF $MODEL"
-	IMEI=$(echo "$DATA" | tail -1 | tr -d '"')
-}
-
-get_signal_info(){
-	DATA=$(get_data net)
-	eval $(jsonfilter -s "$DATA" -e "COPS=$['plmn_description']" \
-		-e "COPS_MCC=$['plmn_mcc']" \
-		-e "COPS_MNC_RAW=$['plmn_mnc']" \
-		-e "REG=$['registration']" \
-		-e "ROAM=$['roaming']" )
-	DATA=$(get_data sig)
-	eval $(jsonfilter -s "$DATA" -e "MODE=$['type']" \
-		-e "CSQ_RSSI=$['rssi']" \
-		-e "RSRP=$['rsrp']" \
-		-e "RSRQ=$['rsrq']" \
-		-e "SINR=$['snr']")
-	DATA=$(get_data base)
-	eval $(jsonfilter -s "$DATA" -e "TAC_NUM=$['$MODE']['tracking_area_code']" \
-		-e "CELL=$['$MODE']['cell_id']" \
-		-e "ENBID=$['$MODE']['enodeb_id']")
-	DATA=$(get_data sta)
-	EARFCN=$(echo "$DATA" | awk '/channel/{gsub(",",""); print $2}' | head -1)
-	PCI=$(echo "$DATA" | awk '/serving_cell_id/{gsub(",",""); print $2}' | head -1)
-	case $MODE in
-		LTE)
-			DATA=$(get_data lte)
-			eval $(jsonfilter -s "$DATA" -e "BW=$['primary']['bandwidth']")
-			CA=$(echo "$DATA" |  awk -F [:] '/secondary_/{gsub("\"","");print $1}')
-			LTE_CA=$(echo "$CA" | wc -l)
-			if [ $LTE_CA -ge 1 ]; then
-				BWCA=0
-				for a in $CA; do
-					eval $(jsonfilter -s "$DATA" -e "SCx=$['$a']['band']" \
-						-e "BWC=$['$a']['bandwidth']")
-					SCC="$SCC+$SCx"
-					BWCA=$(($BWCA+$BWC))
-				done
-				BWCA=$(($BW+$BWCA))
-			fi
-			
-		;;
-	esac
-	MODE=$(echo $MODE | awk '{print toupper($1)}')
-	if [ "$COPS_MNC_RAW" -lt "10" ]; then
-		COPS_MNC=0${COPS_MNC_RAW}
-	else
-		COPS_MNC=${COPS_MNC_RAW}
-	fi
-	if [ "x${COPS}" = "x" ]; then
-		COPS="${COPS_MCC} ${COPS_MNC}"
-	fi
- 
-	SINR=$(echo $SINR | awk '{printf "%.0f\n", $1}')
-	LAC=$(echo $TAC_NUM | awk '{printf "%x\n", toupper($1)}')
-	ENBID_h=$(printf %x $ENBID)
-	CELL_h=$(printf %x $CELL)
-	if [ "$CELL" -le 15 ]; then
-		CELL_h="0${CID_h}"
-	fi
-	CID="${ENBID_h}${CELL_h}"
-	CID_NUM=$(printf %d 0x$CID)
-
-	case $REG in
-		not_registered) REGST=0 ;;
-		registered)
-			case $ROAM in
-				true) REGST=5 ;;
-				*) REGST=1 ;;
-			esac
-		;;
-		searching) REGST=2 ;;
-		registering_denied) REGST=3 ;;
-		unknown) REGST=4 ;;
-	esac
- 
-	CSQ_PER=$(echo $CSQ_RSSI |awk '{printf "%d\n", (100*(1-(-50 - $1)/(-50 - -120)))}')
-        [ $CSQ_RSSI -ge -110 ] && CSQ_COL="black"
-	[ $CSQ_RSSI -ge -105 ] && CSQ_COL="red"
-	[ $CSQ_RSSI -ge -95 ] && CSQ_COL="orange"
-	[ $CSQ_RSSI -ge -75 ] && CSQ_COL="green"
-	if [ $CSQ_PER -gt 100 ]; then
-		 CSQ_PER=100
-	elif [ $CSQ_PER -lt 0 ]; then
-		CSQ_PER=0
-	fi
-
-	DECIMAL=$(uci -q get modeminfo.@modeminfo[0].general)
-	if [ "x${DECIMAL}" != "x" ]; then
-                LAC=$LAC_NUM
-                CID=$CID_NUM
-        fi
-}
-
-function get_data_in(){
-        get_hardware_info >/dev/null 2>&1
-        get_signal_info >/dev/null 2>&1
-}
-
-get_hwinfo(){
-	continue
-}

modeminfo/root/usr/share/modeminfo/modeminfo

@@ -4,7 +4,7 @@ trap 'cleanup >/dev/null 2>&1; exit 0' INT TERM
 SECTIONS=$(echo $(uci show modeminfo | awk -F [\]\[\@=] '/=modeminfo/{print $3}'))
 
 get_vars(){
-	for v in device device_qmi qmi_proxy decimail qmi_mode;  do
+	for v in device device_qmi qmi_trap decimail qmi_mode;  do
 		eval $v=$(uci -q get modeminfo.@modeminfo[${s}].${v} 2>/dev/null)
 	done
 }
@@ -62,17 +62,12 @@ function if_null() {
 
 
 qmi_device(){
-	if [ $qmi_mode ]; then
-		SCRIPT=/usr/share/modeminfo/scripts/modeminfo-qmi
-	else
-		SCRIPT=/usr/share/modeminfo/scripts/modeminfo
-	fi
-
-	if [ -r $SCRIPT ]; then
+	[ -n "$qmi_mode" ] || SCRIPT=/usr/share/modeminfo/scripts/modeminfo
+	[ -r $SCRIPT ] && {
 		. $SCRIPT
-	else
+	} || {
 		exit 0
-	fi
+	}
 }
 
 
@@ -86,24 +81,33 @@ echo "{ \"modem\" : ["
 
 for s in $SECTIONS; do
 	m=$((${s} + 1))
-	if [ "$s" ]; then
-		get_vars
-		qmi_device
-		get_device_info
-		get_data_in >/dev/null 2>&1
-		if_null
-		json_status
-	fi
-	if [ "$ARGSLEN" = "${m}" ]; then
-		echo "	}"
+	get_vars
+	if [ $qmi_mode ]; then
+		if [ "$s" ]; then
+			/usr/bin/qminfo $device_qmi --json --${qmi_trap} 
+		fi
+		if [ "$ARGSLEN" != "${m}" ]; then
+			echo ","
+		fi
 	else
-		echo "	},"
+		if [ "$s" ]; then
+			qmi_device
+			get_device_info
+			get_data_in >/dev/null 2>&1
+			if_null
+			json_status
+		fi
+		if [ "$ARGSLEN" = "${m}" ]; then
+			echo "	}"
+		else
+			echo "	},"
+		fi
+		# flush modem variables
+		unset BWCA SCC SC BWDx BWPx BWCx BWDL LTE_CA \
+        	        DEVICE COPS MODE CSQ_PER LAC CSQ_RSSI \
+                	SINR RSRP IMEI REGST EARFCN CHIPTEMP FW \
+	                ICCID IMSI RSRQ DISTANCE
 	fi
-	# flush modem variables
-	unset BWCA SCC SC BWDx BWPx BWCx BWDL LTE_CA \
-                DEVICE COPS MODE CSQ_PER LAC CSQ_RSSI \
-                SINR RSRP IMEI REGST EARFCN CHIPTEMP FW \
-                ICCID IMSI RSRQ DISTANCE
 done
 
 echo "]}"