✨ Sync 2026-03-14 19:52:12

luci-app-openclaw/scripts/build-node-musl.sh

@@ -0,0 +1,114 @@
+#!/bin/sh
+# 在 Alpine ARM64 Docker 容器内运行
+# 环境变量: NODE_VER (目标版本号), /output (输出目录)
+#
+# 打包策略:
+#   使用 patchelf 修改 node 二进制的 ELF interpreter 和 rpath，
+#   使其直接使用打包的 musl 链接器和共享库，无需 LD_LIBRARY_PATH。
+#   这样 process.execPath 返回正确的 node 路径，子进程 fork 也能正常工作。
+#   安装路径固定为 /opt/openclaw/node (与 openclaw-env 一致)。
+set -e
+
+INSTALL_PREFIX="/opt/openclaw/node"
+
+apk add --no-cache nodejs npm xz icu-data-full patchelf
+
+ACTUAL_VER=$(node --version | sed 's/^v//')
+echo "Alpine Node.js version: v${ACTUAL_VER} (requested: v${NODE_VER})"
+
+# 使用实际版本号作为文件名 (Alpine apk 的 nodejs 版本可能与请求版本不同)
+if [ "$ACTUAL_VER" != "$NODE_VER" ]; then
+	echo "WARNING: Actual version (${ACTUAL_VER}) differs from requested (${NODE_VER})"
+	echo "         Using actual version for package name"
+fi
+PKG_NAME="node-v${ACTUAL_VER}-linux-arm64-musl"
+PKG_DIR="/tmp/${PKG_NAME}"
+mkdir -p "${PKG_DIR}/bin" "${PKG_DIR}/lib/node_modules" "${PKG_DIR}/include/node"
+
+# 复制 node 二进制
+cp "$(which node)" "${PKG_DIR}/bin/node"
+chmod +x "${PKG_DIR}/bin/node"
+
+# 收集 node 依赖的所有共享库 (Alpine node 是动态链接的)
+echo "=== Collecting shared libraries ==="
+LIB_DIR="${PKG_DIR}/lib"
+ldd "$(which node)" 2>/dev/null | while read -r line; do
+  # 解析 ldd 输出: libxxx.so => /usr/lib/libxxx.so (0x...)
+  lib_path=$(echo "$line" | grep -oE '/[^ ]+\.so[^ ]*' | head -1)
+  if [ -n "$lib_path" ] && [ -f "$lib_path" ]; then
+    cp -L "$lib_path" "$LIB_DIR/" 2>/dev/null || true
+    echo "  + $(basename "$lib_path")"
+  fi
+done
+# 确保 musl 动态链接器也在
+if [ -f /lib/ld-musl-aarch64.so.1 ]; then
+  cp -L /lib/ld-musl-aarch64.so.1 "$LIB_DIR/" 2>/dev/null || true
+  echo "  + ld-musl-aarch64.so.1"
+fi
+echo "Libraries collected: $(ls "$LIB_DIR"/*.so* 2>/dev/null | wc -l) files"
+
+# 用 patchelf 修改 node 二进制:
+#   - interpreter 指向打包的 musl 链接器 (绝对路径，对应安装后的位置)
+#   - rpath 指向打包的 lib 目录
+echo "=== Patching ELF binary ==="
+patchelf --set-interpreter "${INSTALL_PREFIX}/lib/ld-musl-aarch64.so.1" "${PKG_DIR}/bin/node"
+patchelf --set-rpath "${INSTALL_PREFIX}/lib" "${PKG_DIR}/bin/node"
+echo "  interpreter: ${INSTALL_PREFIX}/lib/ld-musl-aarch64.so.1"
+echo "  rpath: ${INSTALL_PREFIX}/lib"
+
+# 复制 ICU 完整数据 (npm 的 Intl.Collator 需要)
+echo "=== Copying ICU data ==="
+ICU_DAT=$(find /usr/share/icu -name "icudt*.dat" 2>/dev/null | head -1)
+if [ -n "$ICU_DAT" ] && [ -f "$ICU_DAT" ]; then
+  mkdir -p "${PKG_DIR}/share/icu"
+  cp "$ICU_DAT" "${PKG_DIR}/share/icu/"
+  echo "  + $(basename "$ICU_DAT") ($(du -h "$ICU_DAT" | cut -f1))"
+else
+  echo "  WARNING: ICU data file not found"
+fi
+
+# 创建 node wrapper 脚本 (只设置 NODE_ICU_DATA，ELF 层面已解决链接器和库路径)
+cat > "${PKG_DIR}/bin/node-wrapper" << 'NODEWRAPPER'
+#!/bin/sh
+SELF_DIR="$(cd "$(dirname "$0")" && pwd)"
+export NODE_ICU_DATA="${SELF_DIR}/../share/icu"
+exec "${SELF_DIR}/node" "$@"
+NODEWRAPPER
+chmod +x "${PKG_DIR}/bin/node-wrapper"
+
+# 复制 npm
+if [ -d /usr/lib/node_modules/npm ]; then
+  cp -r /usr/lib/node_modules/npm "${PKG_DIR}/lib/node_modules/"
+fi
+
+# 创建 npm wrapper (直接调用 patchelf 后的 node，只需设置 ICU)
+cat > "${PKG_DIR}/bin/npm" << 'NPMWRAPPER'
+#!/bin/sh
+SELF_DIR="$(cd "$(dirname "$0")" && pwd)"
+export NODE_ICU_DATA="${SELF_DIR}/../share/icu"
+exec "${SELF_DIR}/node" "${SELF_DIR}/../lib/node_modules/npm/bin/npm-cli.js" "$@"
+NPMWRAPPER
+# 创建 npx wrapper
+cat > "${PKG_DIR}/bin/npx" << 'NPXWRAPPER'
+#!/bin/sh
+SELF_DIR="$(cd "$(dirname "$0")" && pwd)"
+export NODE_ICU_DATA="${SELF_DIR}/../share/icu"
+exec "${SELF_DIR}/node" "${SELF_DIR}/../lib/node_modules/npm/bin/npx-cli.js" "$@"
+NPXWRAPPER
+chmod +x "${PKG_DIR}/bin/npm" "${PKG_DIR}/bin/npx"
+
+# 验证 (需要将打包内容放到目标路径来测试 patchelf 结果)
+echo "=== Verification ==="
+mkdir -p "${INSTALL_PREFIX}"
+cp -a "${PKG_DIR}"/* "${INSTALL_PREFIX}/"
+"${INSTALL_PREFIX}/bin/node" --version
+"${INSTALL_PREFIX}/bin/node" -e "console.log('execPath:', process.execPath)"
+"${INSTALL_PREFIX}/bin/node" -e "console.log(process.arch, process.platform, process.versions.modules)"
+NODE_ICU_DATA="${INSTALL_PREFIX}/share/icu" "${INSTALL_PREFIX}/bin/npm" --version 2>/dev/null || echo "npm needs ICU data"
+rm -rf "${INSTALL_PREFIX}"
+
+# 打包
+cd /tmp
+tar cJf "/output/${PKG_NAME}.tar.xz" "${PKG_NAME}"
+ls -lh "/output/${PKG_NAME}.tar.xz"
+echo "=== Done: ${PKG_NAME}.tar.xz ==="

luci-app-openclaw/scripts/build_ipk.sh

@@ -0,0 +1,147 @@
+#!/bin/sh
+# ============================================================================
+# 本地构建 .ipk 包 (无需 OpenWrt SDK)
+# 用法: sh scripts/build_ipk.sh [output_dir]
+# ============================================================================
+set -e
+
+SCRIPT_DIR=$(cd "$(dirname "$0")" && pwd)
+PKG_DIR=$(cd "$SCRIPT_DIR/.." && pwd)
+OUT_DIR="${1:-$PKG_DIR/dist}"
+# 确保 OUT_DIR 是绝对路径
+case "$OUT_DIR" in
+	/*) ;;
+	*) OUT_DIR="$PKG_DIR/$OUT_DIR" ;;
+esac
+mkdir -p "$OUT_DIR"
+PKG_NAME="luci-app-openclaw"
+PKG_VERSION=$(cat "$PKG_DIR/VERSION" 2>/dev/null | tr -d '[:space:]' || echo "1.0.0")
+PKG_RELEASE="1"
+
+echo "=== 构建 ${PKG_NAME} .ipk 包 ==="
+
+STAGING=$(mktemp -d)
+trap "rm -rf '$STAGING'" EXIT
+
+# ── 构建 data.tar.gz ──
+DATA_DIR="$STAGING/data"
+mkdir -p "$DATA_DIR"
+
+# UCI config
+mkdir -p "$DATA_DIR/etc/config"
+cp "$PKG_DIR/root/etc/config/openclaw" "$DATA_DIR/etc/config/"
+
+# UCI defaults
+mkdir -p "$DATA_DIR/etc/uci-defaults"
+cp "$PKG_DIR/root/etc/uci-defaults/99-openclaw" "$DATA_DIR/etc/uci-defaults/"
+chmod +x "$DATA_DIR/etc/uci-defaults/99-openclaw"
+
+# init.d
+mkdir -p "$DATA_DIR/etc/init.d"
+cp "$PKG_DIR/root/etc/init.d/openclaw" "$DATA_DIR/etc/init.d/"
+chmod +x "$DATA_DIR/etc/init.d/openclaw"
+
+# bin
+mkdir -p "$DATA_DIR/usr/bin"
+cp "$PKG_DIR/root/usr/bin/openclaw-env" "$DATA_DIR/usr/bin/"
+chmod +x "$DATA_DIR/usr/bin/openclaw-env"
+
+# LuCI controller
+mkdir -p "$DATA_DIR/usr/lib/lua/luci/controller"
+cp "$PKG_DIR/luasrc/controller/openclaw.lua" "$DATA_DIR/usr/lib/lua/luci/controller/"
+
+# LuCI CBI
+mkdir -p "$DATA_DIR/usr/lib/lua/luci/model/cbi/openclaw"
+cp "$PKG_DIR/luasrc/model/cbi/openclaw/"*.lua "$DATA_DIR/usr/lib/lua/luci/model/cbi/openclaw/"
+
+# LuCI views
+mkdir -p "$DATA_DIR/usr/lib/lua/luci/view/openclaw"
+cp "$PKG_DIR/luasrc/view/openclaw/"*.htm "$DATA_DIR/usr/lib/lua/luci/view/openclaw/"
+
+# oc-config assets
+mkdir -p "$DATA_DIR/usr/share/openclaw"
+cp "$PKG_DIR/VERSION" "$DATA_DIR/usr/share/openclaw/VERSION"
+cp "$PKG_DIR/root/usr/share/openclaw/oc-config.sh" "$DATA_DIR/usr/share/openclaw/"
+chmod +x "$DATA_DIR/usr/share/openclaw/oc-config.sh"
+cp "$PKG_DIR/root/usr/share/openclaw/web-pty.js" "$DATA_DIR/usr/share/openclaw/"
+
+# Web PTY UI
+cp -r "$PKG_DIR/root/usr/share/openclaw/ui" "$DATA_DIR/usr/share/openclaw/"
+
+# i18n (po2lmo 可选)
+mkdir -p "$DATA_DIR/usr/lib/lua/luci/i18n"
+if command -v po2lmo >/dev/null 2>&1 && [ -f "$PKG_DIR/po/zh-cn/openclaw.po" ]; then
+	po2lmo "$PKG_DIR/po/zh-cn/openclaw.po" "$DATA_DIR/usr/lib/lua/luci/i18n/openclaw.zh-cn.lmo" 2>/dev/null || true
+fi
+
+# 计算安装大小
+INSTALLED_SIZE=$(du -sk "$DATA_DIR" | awk '{print $1}')
+
+(cd "$DATA_DIR" && tar czf "$STAGING/data.tar.gz" .)
+
+# ── 构建 control.tar.gz ──
+CTRL_DIR="$STAGING/control"
+mkdir -p "$CTRL_DIR"
+
+cat > "$CTRL_DIR/control" << EOF
+Package: ${PKG_NAME}
+Version: ${PKG_VERSION}-${PKG_RELEASE}
+Depends: luci-compat, luci-base, curl, openssl-util, script-utils, tar
+Source: https://github.com/10000ge10000/luci-app-openclaw
+SourceName: ${PKG_NAME}
+License: GPL-3.0
+Section: luci
+SourceDateEpoch: $(date +%s)
+Maintainer: 10000ge10000 <10000ge10000@users.noreply.github.com>
+Architecture: all
+Installed-Size: ${INSTALLED_SIZE}
+Description: OpenClaw AI 网关 LuCI 管理插件
+EOF
+
+cat > "$CTRL_DIR/postinst" << 'EOF'
+#!/bin/sh
+[ -n "${IPKG_INSTROOT}" ] || {
+	( . /etc/uci-defaults/99-openclaw ) && rm -f /etc/uci-defaults/99-openclaw
+	rm -f /tmp/luci-indexcache /tmp/luci-modulecache/* /tmp/luci-indexcache.*.json 2>/dev/null
+	# 重启 Web PTY (使其加载新文件和新 token)
+	PTY_PID=$(pgrep -f 'web-pty.js' 2>/dev/null | head -1)
+	[ -n "$PTY_PID" ] && kill "$PTY_PID" 2>/dev/null || true
+	exit 0
+}
+EOF
+chmod +x "$CTRL_DIR/postinst"
+
+cat > "$CTRL_DIR/postrm" << 'EOF'
+#!/bin/sh
+[ -n "${IPKG_INSTROOT}" ] || {
+	rm -f /tmp/luci-indexcache /tmp/luci-modulecache/* 2>/dev/null
+}
+EOF
+chmod +x "$CTRL_DIR/postrm"
+
+cat > "$CTRL_DIR/conffiles" << 'EOF'
+/etc/config/openclaw
+EOF
+
+(cd "$CTRL_DIR" && tar czf "$STAGING/control.tar.gz" .)
+
+# ── 组装 .ipk (ar 格式) ──
+mkdir -p "$OUT_DIR"
+IPK_FILE="$OUT_DIR/${PKG_NAME}_${PKG_VERSION}-${PKG_RELEASE}_all.ipk"
+
+echo "2.0" > "$STAGING/debian-binary"
+
+# 清理旧文件
+rm -f "$IPK_FILE"
+
+# 组装 .ipk — OpenWrt opkg 使用 tar.gz 格式 (非 Debian 的 ar 格式)
+(cd "$STAGING" && tar czf "$IPK_FILE" debian-binary control.tar.gz data.tar.gz)
+
+IPK_SIZE=$(wc -c < "$IPK_FILE" | tr -d ' ')
+echo ""
+echo "=== 构建完成 ==="
+echo "输出文件: $IPK_FILE"
+echo "文件大小: ${IPK_SIZE} bytes"
+echo "安装大小: ${INSTALLED_SIZE} KB"
+echo ""
+echo "安装方法: opkg install ${PKG_NAME}_${PKG_VERSION}-${PKG_RELEASE}_all.ipk"

luci-app-openclaw/scripts/build_run.sh

@@ -0,0 +1,257 @@
+#!/bin/sh
+# ============================================================================
+# iStoreOS .run 自解压包构建脚本
+# 用法: sh scripts/build_run.sh [output_dir]
+# ============================================================================
+set -e
+
+SCRIPT_DIR=$(cd "$(dirname "$0")" && pwd)
+PKG_DIR=$(cd "$SCRIPT_DIR/.." && pwd)
+OUT_DIR="${1:-$PKG_DIR/dist}"
+# 确保 OUT_DIR 是绝对路径
+case "$OUT_DIR" in
+	/*) ;;
+	*) OUT_DIR="$PKG_DIR/$OUT_DIR" ;;
+esac
+mkdir -p "$OUT_DIR"
+PKG_NAME="luci-app-openclaw"
+PKG_VERSION=$(cat "$PKG_DIR/VERSION" 2>/dev/null | tr -d '[:space:]' || echo "1.0.0")
+
+echo "=== 构建 iStoreOS .run 安装包 ==="
+echo "源目录: $PKG_DIR"
+echo "输出到: $OUT_DIR"
+
+# 创建临时打包目录
+STAGING=$(mktemp -d)
+trap "rm -rf '$STAGING'" EXIT
+
+# 安装文件到暂存区
+install_files() {
+	local dest="$1"
+
+	# UCI config (仅首次安装时部署默认配置; 升级时保留用户配置)
+	# 安装器会在解压后检测并跳过已有配置, 见 install.sh 中的逻辑
+	mkdir -p "$dest/etc/config"
+	cp "$PKG_DIR/root/etc/config/openclaw" "$dest/etc/config/openclaw.default"
+
+	# UCI defaults
+	mkdir -p "$dest/etc/uci-defaults"
+	cp "$PKG_DIR/root/etc/uci-defaults/99-openclaw" "$dest/etc/uci-defaults/"
+	chmod +x "$dest/etc/uci-defaults/99-openclaw"
+
+	# init.d
+	mkdir -p "$dest/etc/init.d"
+	cp "$PKG_DIR/root/etc/init.d/openclaw" "$dest/etc/init.d/"
+	chmod +x "$dest/etc/init.d/openclaw"
+
+	# bin
+	mkdir -p "$dest/usr/bin"
+	cp "$PKG_DIR/root/usr/bin/openclaw-env" "$dest/usr/bin/"
+	chmod +x "$dest/usr/bin/openclaw-env"
+
+	# LuCI controller
+	mkdir -p "$dest/usr/lib/lua/luci/controller"
+	cp "$PKG_DIR/luasrc/controller/openclaw.lua" "$dest/usr/lib/lua/luci/controller/"
+
+	# LuCI CBI
+	mkdir -p "$dest/usr/lib/lua/luci/model/cbi/openclaw"
+	cp "$PKG_DIR/luasrc/model/cbi/openclaw/"*.lua "$dest/usr/lib/lua/luci/model/cbi/openclaw/"
+
+	# LuCI views
+	mkdir -p "$dest/usr/lib/lua/luci/view/openclaw"
+	cp "$PKG_DIR/luasrc/view/openclaw/"*.htm "$dest/usr/lib/lua/luci/view/openclaw/"
+
+	# oc-config assets
+	mkdir -p "$dest/usr/share/openclaw"
+	cp "$PKG_DIR/VERSION" "$dest/usr/share/openclaw/VERSION"
+	cp "$PKG_DIR/root/usr/share/openclaw/oc-config.sh" "$dest/usr/share/openclaw/"
+	chmod +x "$dest/usr/share/openclaw/oc-config.sh"
+	cp "$PKG_DIR/root/usr/share/openclaw/web-pty.js" "$dest/usr/share/openclaw/"
+
+	# Web PTY UI (recursive copy)
+	cp -r "$PKG_DIR/root/usr/share/openclaw/ui" "$dest/usr/share/openclaw/"
+}
+
+# 创建安装器脚本头部
+create_installer() {
+	cat > "$STAGING/install.sh" << 'INSTALLER_EOF'
+#!/bin/sh
+# luci-app-openclaw iStoreOS 安装器
+set -e
+
+echo "╔══════════════════════════════════════════════════════════════╗"
+echo "║       luci-app-openclaw — OpenClaw AI Gateway 插件           ║"
+echo "╚══════════════════════════════════════════════════════════════╝"
+echo ""
+
+# 检查系统
+if [ ! -f /etc/openwrt_release ]; then
+	echo "错误: 此安装包仅适用于 OpenWrt/iStoreOS 系统"
+	exit 1
+fi
+
+# 检查架构
+ARCH=$(uname -m)
+case "$ARCH" in
+	x86_64|aarch64) ;;
+	*) echo "错误: 不支持的架构 $ARCH (仅支持 x86_64/aarch64)"; exit 1 ;;
+esac
+
+# 检查依赖
+for dep in luci-compat luci-base; do
+	if ! opkg list-installed 2>/dev/null | grep -q "^${dep} "; then
+		echo "警告: 缺少依赖 $dep，尝试安装..."
+		opkg update >/dev/null 2>&1 || true
+		opkg install "$dep" 2>/dev/null || echo "  安装 $dep 失败，请手动安装"
+	fi
+done
+
+echo "正在安装文件..."
+
+# 解压 payload (从 MARKER 行之后)
+ARCHIVE=$(awk '/^__ARCHIVE_BELOW__/ {print NR + 1; exit 0; }' "$0")
+tail -n +$ARCHIVE "$0" | tar xzf - -C / 2>/dev/null
+
+# UCI 配置文件保护: 升级时不覆盖用户已有配置
+if [ -f /etc/config/openclaw ] && [ -f /etc/config/openclaw.default ]; then
+	# 已有配置, 移除默认文件 (保留用户配置)
+	rm -f /etc/config/openclaw.default
+elif [ -f /etc/config/openclaw.default ]; then
+	# 首次安装, 使用默认配置
+	mv /etc/config/openclaw.default /etc/config/openclaw
+fi
+
+# 注册到 opkg，使 iStore 和 opkg 能识别此包
+PKG="luci-app-openclaw"
+PKG_VER="__PKG_VERSION__"
+INFO_DIR="/usr/lib/opkg/info"
+STATUS_FILE="/usr/lib/opkg/status"
+INSTALL_TIME=$(date +%s)
+
+mkdir -p "$INFO_DIR"
+
+# 写入 control 文件
+cat > "$INFO_DIR/$PKG.control" << CTLEOF
+Package: $PKG
+Version: $PKG_VER
+Depends: luci-compat, luci-base, curl, openssl-util, script-utils, tar
+Section: luci
+Architecture: all
+Installed-Size: 0
+Description: OpenClaw AI Gateway — LuCI 界面
+CTLEOF
+
+# 写入文件列表 (payload 中已安装的文件)
+cat > "$INFO_DIR/$PKG.list" << LISTEOF
+__FILE_LIST__
+LISTEOF
+
+# 写入 prerm 脚本 (卸载前执行)
+cat > "$INFO_DIR/$PKG.prerm" << 'RMEOF'
+#!/bin/sh
+/etc/init.d/openclaw stop 2>/dev/null
+/etc/init.d/openclaw disable 2>/dev/null
+exit 0
+RMEOF
+chmod +x "$INFO_DIR/$PKG.prerm"
+
+# 追加到 opkg status 数据库 (先移除旧记录)
+if [ -f "$STATUS_FILE" ]; then
+	awk -v pkg="$PKG" '
+		BEGIN { skip=0 }
+		/^Package:/ { skip=($2==pkg) }
+		/^$/ { if(skip){skip=0; next} }
+		!skip { print }
+	' "$STATUS_FILE" > "${STATUS_FILE}.tmp"
+	mv "${STATUS_FILE}.tmp" "$STATUS_FILE"
+fi
+
+cat >> "$STATUS_FILE" << STEOF
+
+Package: $PKG
+Version: $PKG_VER
+Depends: luci-compat, luci-base, curl, openssl-util, script-utils, tar
+Status: install user installed
+Architecture: all
+Conffiles:
+ /etc/config/openclaw 0
+Installed-Time: $INSTALL_TIME
+STEOF
+
+echo "已注册到 opkg (iStore 可管理)"
+
+# 执行 uci-defaults
+if [ -f /etc/uci-defaults/99-openclaw ]; then
+	echo "执行初始化脚本..."
+	( . /etc/uci-defaults/99-openclaw ) && rm -f /etc/uci-defaults/99-openclaw
+fi
+
+# 清除 LuCI 缓存
+rm -f /tmp/luci-indexcache /tmp/luci-modulecache/* 2>/dev/null
+rm -f /tmp/luci-indexcache.*.json 2>/dev/null
+
+# 重启 Web PTY 服务 (使其加载新文件和新 token)
+# PTY 是 procd 管理的实例, kill 后 procd 会自动 respawn
+PTY_PID=$(pgrep -f 'web-pty.js' 2>/dev/null | head -1)
+if [ -n "$PTY_PID" ]; then
+	echo "重启配置终端服务..."
+	kill "$PTY_PID" 2>/dev/null
+	sleep 1
+fi
+
+echo ""
+echo "✅ 安装完成！"
+echo ""
+echo "后续步骤:"
+echo "  1. 运行 openclaw-env setup  — 下载 Node.js 并安装 OpenClaw"
+echo "  2. 访问 LuCI → 服务 → OpenClaw 进行配置"
+echo "  3. 或执行 /etc/init.d/openclaw enable && /etc/init.d/openclaw start"
+echo ""
+
+exit 0
+__ARCHIVE_BELOW__
+INSTALLER_EOF
+}
+
+# 构建
+echo ""
+echo "[1/4] 安装文件到暂存区..."
+install_files "$STAGING/payload"
+
+echo "[2/4] 生成文件列表..."
+# 生成安装文件列表 (供 opkg 卸载时使用)
+# 注: openclaw.default 安装后会变为 openclaw, 文件列表中记录最终路径
+FILE_LIST=$(cd "$STAGING/payload" && find . -type f | sed 's|^\./|/|' | sed 's|/etc/config/openclaw.default|/etc/config/openclaw|' | sort)
+echo "  共 $(echo "$FILE_LIST" | wc -l | tr -d ' ') 个文件"
+
+echo "[3/4] 创建安装器..."
+create_installer
+
+# 替换安装器中的占位符
+sed -i "s|__PKG_VERSION__|${PKG_VERSION}|g" "$STAGING/install.sh"
+# 替换文件列表占位符 — 使用临时文件拼接避免 sed/awk 多行问题
+{
+	sed '/__FILE_LIST__/,$d' "$STAGING/install.sh"
+	echo "$FILE_LIST"
+	sed '1,/__FILE_LIST__/d' "$STAGING/install.sh"
+} > "$STAGING/install_final.sh"
+mv "$STAGING/install_final.sh" "$STAGING/install.sh"
+
+echo "[4/4] 打包..."
+mkdir -p "$OUT_DIR"
+
+# 创建 payload tarball
+(cd "$STAGING/payload" && tar czf "$STAGING/payload.tar.gz" .)
+
+# 组合: installer header + payload
+RUN_FILE="$OUT_DIR/${PKG_NAME}_${PKG_VERSION}.run"
+cat "$STAGING/install.sh" "$STAGING/payload.tar.gz" > "$RUN_FILE"
+chmod +x "$RUN_FILE"
+
+FILE_SIZE=$(wc -c < "$RUN_FILE" | tr -d ' ')
+echo ""
+echo "=== 构建完成 ==="
+echo "输出文件: $RUN_FILE"
+echo "文件大小: $FILE_SIZE bytes"
+echo ""
+echo "安装方法: sh ${PKG_NAME}_${PKG_VERSION}.run"

luci-app-openclaw/scripts/gen-release-body.sh

@@ -0,0 +1,41 @@
+#!/bin/bash
+# 用法: gen-release-body.sh <版本号> <CHANGELOG路径> <输出目录>
+# 为指定版本生成 GitHub Release body markdown 文件
+set -e
+
+VER="$1"
+CHANGELOG_FILE="$2"
+OUT_DIR="$3"
+
+if [ -z "$VER" ] || [ -z "$CHANGELOG_FILE" ] || [ -z "$OUT_DIR" ]; then
+  echo "用法: $0 <版本号> <CHANGELOG路径> <输出目录>"
+  exit 1
+fi
+
+mkdir -p "$OUT_DIR"
+
+# 提取该版本的 changelog
+CONTENT=$(awk "/^## \\[${VER}\\]/{found=1; next} /^## \\[/{if(found) exit} found{print}" "$CHANGELOG_FILE")
+if [ -z "$CONTENT" ]; then
+  CONTENT="暂无更新日志"
+fi
+
+# 写入文件
+{
+  printf '%s\n' "$CONTENT"
+  echo ""
+  echo "---"
+  echo ""
+  echo '**在线安装** (需联网，自动下载 Node.js + OpenClaw)'
+  echo '```'
+  echo '# iStoreOS'
+  echo "sh luci-app-openclaw_${VER}.run"
+  echo ''
+  echo '# OpenWrt'
+  echo "opkg install luci-app-openclaw_${VER}-1_all.ipk"
+  echo '```'
+  echo ''
+  echo '[使用文档](https://github.com/10000ge10000/luci-app-openclaw#readme) · [问题反馈](https://github.com/10000ge10000/luci-app-openclaw/issues) · [B站](https://space.bilibili.com/59438380) · [博客](https://blog.910501.xyz/)'
+} > "${OUT_DIR}/${VER}.md"
+
+echo "✓ ${VER}.md ($(wc -l < "${OUT_DIR}/${VER}.md") 行)"

luci-app-openclaw/scripts/sync_openlist.sh

@@ -0,0 +1,230 @@
+#!/bin/sh
+# ============================================================================
+# OpenList 网盘同步脚本 — 补齐所有历史版本 + 上传更新记录
+#
+# 功能:
+#   1. 从 GitHub Releases 下载所有版本的 .run + .ipk
+#   2. 从 CHANGELOG.md 提取每个版本的更新记录，生成 更新记录.txt
+#   3. 上传到 OpenList 网盘的 openclaw-在线安装 目录
+#
+# 用法:
+#   sh scripts/sync_openlist.sh
+# ============================================================================
+set -e
+
+SCRIPT_DIR=$(cd "$(dirname "$0")" && pwd)
+PKG_DIR=$(cd "$SCRIPT_DIR/.." && pwd)
+
+# ── 配置 ──
+GITHUB_REPO="10000ge10000/luci-app-openclaw"
+OPENLIST_URL="http://124.243.178.237:15244"
+OPENLIST_USER="admin"
+OPENLIST_PASS="mingmenmama"
+OPENLIST_ROOT="/Quark"
+UPLOAD_SUBDIR="openclaw-在线安装"
+CHANGELOG="$PKG_DIR/CHANGELOG.md"
+WORK_DIR="/tmp/openlist-sync"
+
+# 所有已发布的版本 (按时间顺序)
+ALL_VERSIONS="1.0.0 1.0.1 1.0.2 1.0.3 1.0.4 1.0.5 1.0.6 1.0.7 1.0.8 1.0.9 1.0.10 1.0.11 1.0.12 1.0.14 1.0.15"
+
+log_info()  { printf "  [\033[32m✓\033[0m] %s\n" "$1"; }
+log_warn()  { printf "  [\033[33m!\033[0m] %s\n" "$1"; }
+log_error() { printf "  [\033[31m✗\033[0m] %s\n" "$1"; }
+log_skip()  { printf "  [\033[36m-\033[0m] %s\n" "$1"; }
+
+# ── 获取 Token ──
+get_token() {
+	local resp
+	resp=$(curl -s -X POST "${OPENLIST_URL}/api/auth/login" \
+		-H "Content-Type: application/json" \
+		-d "{\"username\":\"${OPENLIST_USER}\",\"password\":\"${OPENLIST_PASS}\"}")
+
+	local token
+	token=$(echo "$resp" | grep -o '"token":"[^"]*"' | sed 's/"token":"//;s/"//')
+
+	if [ -z "$token" ]; then
+		log_error "OpenList 登录失败"
+		echo "  响应: $resp"
+		exit 1
+	fi
+	echo "$token"
+}
+
+# ── 创建远程目录 ──
+create_remote_dir() {
+	local token="$1"
+	local remote_path="$2"
+	curl -s -X POST "${OPENLIST_URL}/api/fs/mkdir" \
+		-H "Authorization: ${token}" \
+		-H "Content-Type: application/json" \
+		-d "{\"path\":\"${remote_path}\"}" >/dev/null 2>&1 || true
+}
+
+# ── 检查远程文件是否存在 ──
+remote_file_exists() {
+	local token="$1"
+	local remote_path="$2"
+	local filename="$3"
+
+	local resp
+	resp=$(curl -s -X POST "${OPENLIST_URL}/api/fs/list" \
+		-H "Authorization: ${token}" \
+		-H "Content-Type: application/json" \
+		-d "{\"path\":\"${remote_path}\",\"refresh\":false}")
+
+	echo "$resp" | grep -q "\"name\":\"${filename}\""
+}
+
+# ── 上传单个文件 ──
+upload_file() {
+	local token="$1"
+	local local_file="$2"
+	local remote_path="$3"
+	local filename=$(basename "$local_file")
+	local fsize=$(du -h "$local_file" | cut -f1)
+
+	local resp
+	resp=$(curl -s -X PUT "${OPENLIST_URL}/api/fs/put" \
+		-H "Authorization: ${token}" \
+		-H "File-Path: ${remote_path}/${filename}" \
+		-H "Content-Type: application/octet-stream" \
+		--data-binary "@${local_file}" \
+		--max-time 300 2>/dev/null)
+
+	local code=""
+	code=$(echo "$resp" | grep -o '"code":[0-9]*' | grep -o '[0-9]*')
+
+	if [ "$code" = "200" ]; then
+		log_info "${filename} (${fsize}) 上传成功"
+	else
+		log_error "${filename} 上传失败: $resp"
+	fi
+}
+
+# ── 从 CHANGELOG.md 提取指定版本的更新日志 ──
+extract_changelog() {
+	local version="$1"
+	local output_file="$2"
+
+	awk "/^## \\[${version}\\]/{found=1; next} /^## \\[/{if(found) exit} found{print}" \
+		"$CHANGELOG" > "$output_file"
+
+	# 去掉首尾空行
+	sed -i '/./,$!d' "$output_file"          # 去掉开头空行
+	sed -i ':a; /^[[:space:]]*$/{ $d; N; ba }' "$output_file"  # 去掉末尾空行 (GNU sed)
+
+	if [ ! -s "$output_file" ]; then
+		echo "暂无更新日志" > "$output_file"
+	fi
+}
+
+# ── 从 GitHub 下载文件 ──
+download_release_file() {
+	local version="$1"
+	local filename="$2"
+	local output="$3"
+
+	local url="https://github.com/${GITHUB_REPO}/releases/download/v${version}/${filename}"
+
+	if [ -f "$output" ]; then
+		log_skip "${filename} 已在本地缓存"
+		return 0
+	fi
+
+	if curl -sL --fail -o "$output" "$url" 2>/dev/null; then
+		# 检查是否为有效文件 (排除 GitHub 返回 Not Found HTML)
+		local size=$(wc -c < "$output")
+		if [ "$size" -lt 1000 ]; then
+			local content=$(cat "$output")
+			if echo "$content" | grep -qi "not found"; then
+				rm -f "$output"
+				return 1
+			fi
+		fi
+		return 0
+	else
+		rm -f "$output"
+		return 1
+	fi
+}
+
+# ══════════════════════════════════════════════════════════════
+#  主流程
+# ══════════════════════════════════════════════════════════════
+
+echo ""
+echo "================================================================"
+echo "  OpenList 网盘同步 — 补齐所有历史版本"
+echo "================================================================"
+echo ""
+
+# 准备工作目录
+rm -rf "$WORK_DIR"
+mkdir -p "$WORK_DIR"
+
+# 登录
+echo "正在登录 OpenList..."
+TOKEN=$(get_token)
+log_info "登录成功"
+echo ""
+
+TOTAL_UPLOADED=0
+
+for VER in $ALL_VERSIONS; do
+	echo "── v${VER} ──────────────────────────────────────"
+	REMOTE_DIR="${OPENLIST_ROOT}/${UPLOAD_SUBDIR}/v${VER}"
+	VER_DIR="${WORK_DIR}/v${VER}"
+	mkdir -p "$VER_DIR"
+
+	# 创建远程目录
+	create_remote_dir "$TOKEN" "$REMOTE_DIR"
+
+	# 1) 下载 .run
+	RUN_FILE="luci-app-openclaw_${VER}.run"
+	if remote_file_exists "$TOKEN" "$REMOTE_DIR" "$RUN_FILE"; then
+		log_skip "${RUN_FILE} 已存在于网盘"
+	else
+		echo "  下载 ${RUN_FILE}..."
+		if download_release_file "$VER" "$RUN_FILE" "${VER_DIR}/${RUN_FILE}"; then
+			upload_file "$TOKEN" "${VER_DIR}/${RUN_FILE}" "$REMOTE_DIR"
+			TOTAL_UPLOADED=$((TOTAL_UPLOADED + 1))
+		else
+			log_error "${RUN_FILE} 下载失败"
+		fi
+	fi
+
+	# 2) 下载 .ipk
+	IPK_FILE="luci-app-openclaw_${VER}-1_all.ipk"
+	if remote_file_exists "$TOKEN" "$REMOTE_DIR" "$IPK_FILE"; then
+		log_skip "${IPK_FILE} 已存在于网盘"
+	else
+		echo "  下载 ${IPK_FILE}..."
+		if download_release_file "$VER" "$IPK_FILE" "${VER_DIR}/${IPK_FILE}"; then
+			upload_file "$TOKEN" "${VER_DIR}/${IPK_FILE}" "$REMOTE_DIR"
+			TOTAL_UPLOADED=$((TOTAL_UPLOADED + 1))
+		else
+			log_error "${IPK_FILE} 下载失败"
+		fi
+	fi
+
+	# 3) 生成并上传 更新记录.txt
+	CHANGELOG_FILE="更新记录.txt"
+	if remote_file_exists "$TOKEN" "$REMOTE_DIR" "$CHANGELOG_FILE"; then
+		log_skip "${CHANGELOG_FILE} 已存在于网盘"
+	else
+		extract_changelog "$VER" "${VER_DIR}/${CHANGELOG_FILE}"
+		upload_file "$TOKEN" "${VER_DIR}/${CHANGELOG_FILE}" "$REMOTE_DIR"
+		TOTAL_UPLOADED=$((TOTAL_UPLOADED + 1))
+	fi
+
+	echo ""
+done
+
+# 清理
+rm -rf "$WORK_DIR"
+
+echo "================================================================"
+echo "  同步完成！共上传 ${TOTAL_UPLOADED} 个文件"
+echo "================================================================"
+echo ""

luci-app-openclaw/scripts/upload_openlist.sh

@@ -0,0 +1,67 @@
+#!/bin/sh
+set -e
+
+SCRIPT_DIR=$(cd "$(dirname "$0")" && pwd)
+PKG_DIR=$(cd "$SCRIPT_DIR/.." && pwd)
+DIST_DIR="${1:-$PKG_DIR/dist}"
+
+if [ -z "$OPENLIST_URL" ]; then
+echo "错误: 请设置 OPENLIST_URL 环境变量"
+exit 1
+fi
+
+if [ -z "$OPENLIST_TOKEN" ] && { [ -z "$OPENLIST_USER" ] || [ -z "$OPENLIST_PASS" ]; }; then
+echo "错误: 请设置登录凭据"
+exit 1
+fi
+
+UPLOAD_ROOT="${OPENLIST_PATH:-/}"
+PKG_VERSION=$(cat "$PKG_DIR/VERSION" 2>/dev/null | tr -d '[:space:]' || echo "unknown")
+UPLOAD_ROOT="${UPLOAD_ROOT%/}"
+UPLOAD_SUBDIR="openclaw-在线安装"
+OPENLIST_URL="${OPENLIST_URL%/}"
+
+get_token() {
+if [ -n "$OPENLIST_TOKEN" ]; then echo "$OPENLIST_TOKEN"; return; fi
+local resp=$(curl -s -X POST "${OPENLIST_URL}/api/auth/login" \
+-H "Content-Type: application/json" \
+-d "{\"username\":\"${OPENLIST_USER}\",\"password\":\"${OPENLIST_PASS}\"}")
+local token=$(echo "$resp" | grep -o '"token":"[^"]*"' | sed 's/"token":"//;s/"//' | head -n 1)
+if [ -z "$token" ]; then exit 1; fi
+echo "$token"
+}
+
+create_remote_dir() {
+curl -s -X POST "${OPENLIST_URL}/api/fs/mkdir" \
+-H "Authorization: ${1}" \
+-H "Content-Type: application/json" \
+-d "{\"path\":\"${2}\"}" >/dev/null 2>&1 || true
+}
+
+upload_file() {
+local filename=$(basename "$2")
+echo "  上传: ${filename} ..."
+local resp=$(curl -s -X PUT "${OPENLIST_URL}/api/fs/put" \
+-H "Authorization: ${1}" \
+-H "File-Path: ${3}/${filename}" \
+-H "Content-Type: application/octet-stream" \
+--data-binary "@${2}" \
+--max-time 3600)
+local code=$(echo "$resp" | grep -o '"code":[0-9]*' | grep -o '[0-9]*' | head -n 1)
+if [ "$code" = "200" ]; then echo "  [✓] 上传成功"; else echo "  [✗] 失败: $resp"; fi
+}
+
+UPLOAD_FILES=$(find "$DIST_DIR" -type f -name "*.run" -o -name "*.ipk" 2>/dev/null)
+if [ -z "$UPLOAD_FILES" ]; then echo "错误: 未找到可上传文件"; exit 1; fi
+
+TOKEN=$(get_token)
+REMOTE_DIR="${UPLOAD_ROOT}/${UPLOAD_SUBDIR}/v${PKG_VERSION}"
+REMOTE_DIR=$(echo "$REMOTE_DIR" | sed 's#^//#/#g')
+
+echo "创建远程目录: ${REMOTE_DIR}"
+create_remote_dir "$TOKEN" "$REMOTE_DIR"
+
+for f in $UPLOAD_FILES; do
+upload_file "$TOKEN" "$f" "$REMOTE_DIR"
+done
+echo "✅ 上传完成！"