diff --git a/my-default-settings/Makefile b/my-default-settings/Makefile
index e61fc65c3..f07cadd6b 100644
--- a/my-default-settings/Makefile
+++ b/my-default-settings/Makefile
@@ -10,7 +10,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=my-default-settings
 PKG_VERSION:=2
-PKG_RELEASE:=15
+PKG_RELEASE:=16
 
 include $(INCLUDE_DIR)/package.mk
 
diff --git a/my-default-settings/files/sbin/mywifi b/my-default-settings/files/sbin/mywifi
index 6d70b69e2..eb2c04ca2 100644
--- a/my-default-settings/files/sbin/mywifi
+++ b/my-default-settings/files/sbin/mywifi
@@ -63,7 +63,7 @@ while [ $# -gt 0 ]; do
     shift
 done
 
-# 密码校验：如果传入了密码，校验其长度是否符合 WPA/WPA2/WPA3 规范（8~63位）
+# 密码合法性校验
 if [ $HAS_PASSWD -eq 1 ] && [ -n "$CUSTOM_PASSWD" ]; then
     pwd_len=${#CUSTOM_PASSWD}
     if [ "$pwd_len" -lt 8 ] || [ "$pwd_len" -gt 63 ]; then
@@ -75,7 +75,67 @@ else
     SSID_PASSWD=""
 fi
 
-# 2. 识别射频频段函数 (2g, 5g, 6g)
+# 2. 深度就绪检测：确保内核PHY驱动、多频硬件、系统初始化状态和UCI配置全部真正就绪
+wait_wifi_ready() {
+    local max_wait=15
+    local waited=0
+
+    while [ $waited -lt $max_wait ]; do
+        local phy_count=0
+        local uci_count=0
+
+        # B. 检查内核物理无线设备 (PHY)
+        local phys="$(ls -d /sys/class/ieee80211/phy* 2>/dev/null)"
+        [ -n "$phys" ] && phy_count=$(echo "$phys" | wc -w)
+
+        # C. 统计 UCI wireless 中实际已解析出的 wifi-device 节点数量（非文件大小）
+        if [ -s /etc/config/wireless ]; then
+            local uci_radios="$(uci -q show wireless 2>/dev/null | sed -n 's/^wireless\.\([^.]*\)=wifi-device/\1/p')"
+            [ -n "$uci_radios" ] && uci_count=$(echo "$uci_radios" | wc -w)
+        fi
+
+        # D. 自动探测与配置补全：
+        # - 物理网卡已加载，但 UCI 配置中的 radio 数量少于物理网卡数量（多频网卡尚未完全生成配置）
+        # - 或者配置文件缺失/没有 radio 配置
+        if [ $phy_count -gt 0 ] && [ $uci_count -lt $phy_count ]; then
+            [ -x /sbin/wifi ] && /sbin/wifi config >/dev/null 2>&1
+        elif [ $phy_count -eq 0 ] && [ $uci_count -eq 0 ] && [ ! -s /etc/config/wireless ]; then
+            [ -x /sbin/wifi ] && /sbin/wifi config >/dev/null 2>&1
+        fi
+
+        # 重新同步一次 UCI radio 数量
+        if [ -s /etc/config/wireless ]; then
+            local uci_radios_check="$(uci -q show wireless 2>/dev/null | sed -n 's/^wireless\.\([^.]*\)=wifi-device/\1/p')"
+            [ -n "$uci_radios_check" ] && uci_count=$(echo "$uci_radios_check" | wc -w)
+        fi
+
+        # E. 判定就绪标准：
+        # 1) UCI 中有效 wifi-device 数量 > 0
+        # 2) 若检测到物理 PHY，UCI radio 数量必须完全覆盖检测到的 PHY 数量
+        if [ $uci_count -gt 0 ]; then
+            if [ $phy_count -eq 0 ] || [ $uci_count -ge $phy_count ]; then
+                return 0
+            fi
+        fi
+
+        sleep 1
+        waited=$((waited + 1))
+    done
+
+    # 超时保护：只要至少有一个 radio 节点，允许降级继续
+    if [ $uci_count -gt 0 ]; then
+        return 0
+    fi
+    return 1
+}
+
+# 执行深度就绪等待
+if ! wait_wifi_ready; then
+    echo "[ERROR] 未检测到可用无线硬件或无线配置生成超时！" >&2
+    exit 1
+fi
+
+# 3. 识别射频频段函数 (2g, 5g, 6g)
 detect_band() {
     local radio="$1"
     local band="$(uci -q get wireless.${radio}.band 2>/dev/null | tr 'A-Z' 'a-z')"
@@ -86,9 +146,9 @@ detect_band() {
         *6g*) echo "6g"; return ;;
     esac
 
-    # 若未定义 band 属性，根据 channel（信道）推断
+    # 信道 (channel) 推断
     local channel="$(uci -q get wireless.${radio}.channel 2>/dev/null)"
-    if [ -n "$channel" ] && [ "$channel" -eq "$channel" ] 2>/dev/null; then
+    if [ -n "$channel" ] && [ "$channel" -eq "$channel" 2>/dev/null ]; then
         if [ "$channel" -ge 1 ] && [ "$channel" -le 14 ]; then
             echo "2g"; return
         elif [ "$channel" -ge 32 ] && [ "$channel" -le 177 ]; then
@@ -98,7 +158,7 @@ detect_band() {
         fi
     fi
 
-    # 根据 hwmode 模式推断
+    # hwmode 推断
     local hwmode="$(uci -q get wireless.${radio}.hwmode 2>/dev/null | tr 'A-Z' 'a-z')"
     case "$hwmode" in
         *a*) echo "5g"; return ;;
@@ -117,20 +177,6 @@ detect_band() {
     echo "2g"
 }
 
-# 3. 检查并生成无线配置（非空探测，避免死等 10 秒）
-if [ ! -s /etc/config/wireless ]; then
-    [ -x /sbin/wifi ] && /sbin/wifi config >/dev/null 2>&1
-    for i in $(seq 1 10); do
-        [ -s /etc/config/wireless ] && break
-        sleep 1
-    done
-fi
-
-if [ ! -s /etc/config/wireless ]; then
-    echo "[ERROR] 未检测到无线配置或无可用无线设备！" >&2
-    exit 1
-fi
-
 # 4. 加载系统发行版信息（若存在）
 [ -f /etc/openwrt_release ] && . /etc/openwrt_release
 
@@ -222,6 +268,7 @@ done
 # 提交配置
 uci commit wireless 2>/dev/null
 
+# 若存在 base_config（kiddin9 固件状态记录），更新状态
 if uci -q get base_config.@status[0] >/dev/null 2>&1; then
     uci -q set base_config.@status[0].wifi=1
     uci commit base_config 2>/dev/null