#!/bin/sh /etc/rc.common # # Copyright (C) 2015 OpenWrt-dist # # This is free software, licensed under the GNU General Public License v3. # See /LICENSE for more information. # START=30 CONFIG=miaplus # 非 procd 脚本:status 命令不在 rc.common 默认命令表里,需显式注册 EXTRA_COMMANDS="status" EXTRA_HELP=" status Show service status (auto fw3/fw4)" . /lib/functions.sh # 检测当前使用的防火墙框架:fw4 (nftables) 还是 fw3 (iptables) # 注意:fw4 与 fw3 共用 /etc/config/firewall,不存在 /etc/config/fw4, # 只能靠 fw4 / nft 命令是否存在来判定。 have_fw4() { command -v fw4 >/dev/null 2>&1 && command -v nft >/dev/null 2>&1 } uci_export_section_name() { local ret=$(uci -n export $CONFIG | grep "config $1" | awk '{print $3}' | awk -F\' '{print $2}') echo ${ret:=$2} } uci_get_by_name() { local ret=$(uci get $CONFIG.$1.$2 2>/dev/null) echo ${ret:=$3} } uci_get_by_type() { local index=0 if [ -n "$4" ]; then index=$4 fi local ret=$(uci get $CONFIG.@$1[$index].$2 2>/dev/null) echo ${ret:=$3} } uci_get_mac_by_template(){ local ret="" for i in $(seq 0 100) do local enable=$(uci_get_by_type macbind enable '' $i) local macaddr=$(uci_get_by_type macbind macaddr '' $i) local template=$(uci_get_by_type macbind template '' $i) if [ -z $enable ] || [ -z $macaddr ] || [ -z $template ]; then break fi if [ "$enable" == "1" ]; then if [ -z "$1" ] || [ "$template" == "$1" ]; then if [ "$ret" == "" ]; then ret=$macaddr else ret="$ret $macaddr" fi fi fi done echo ${ret:=$2} } add_rules(){ config_load "$CONFIG" config_foreach add_template_rule templates } add_template_rule(){ local section="$1" local enable config_get enable "$section" enable 0 [ "$enable" = "1" ] && add_rule "$section" } # 分发到具体实现 add_rule(){ if have_fw4; then add_rule_nft "$1" else add_rule_ipt "$1" fi } # ===================================================================== # fw3 (iptables / ip6tables) # ===================================================================== add_rule_ipt(){ ipv6enable=$(uci -q get miaplus.@basic[0].ipv6enable) local macaddrs=$(uci_get_mac_by_template $1 '') if [ -z "$macaddrs" ]; then return 0 fi for macaddr in $macaddrs do iptables -t filter -A MIAPLUS -m mac --mac-source $macaddr -j DROP [ "${ipv6enable:-0}" -eq 1 ] && ip6tables -t filter -A MIAPLUS -m mac --mac-source $macaddr -j DROP done for i in $(seq 0 100) do local enable=$(uci_get_by_type $1 enable '' $i) local timeon=$(uci_get_by_type $1 timeon '' $i) local timeoff=$(uci_get_by_type $1 timeoff '' $i) local z1=$(uci_get_by_type $1 z1 '' $i) local z2=$(uci_get_by_type $1 z2 '' $i) local z3=$(uci_get_by_type $1 z3 '' $i) local z4=$(uci_get_by_type $1 z4 '' $i) local z5=$(uci_get_by_type $1 z5 '' $i) local z6=$(uci_get_by_type $1 z6 '' $i) local z7=$(uci_get_by_type $1 z7 '' $i) [ "$z1" == "1" ] && Z1="Mon," [ "$z2" == "1" ] && Z2="Tue," [ "$z3" == "1" ] && Z3="Wed," [ "$z4" == "1" ] && Z4="Thu," [ "$z5" == "1" ] && Z5="Fri," [ "$z6" == "1" ] && Z6="Sat," [ "$z7" == "1" ] && Z7="Sun" if [ -z $enable ] || [ -z $timeoff ] || [ -z $timeon ]; then break fi if [ "$enable" == "1" ]; then for macaddr in $macaddrs do iptables -t filter -I MIAPLUS -m mac --mac-source $macaddr -m time --kerneltz --timestart $timeon --timestop $timeoff --weekdays $Z1$Z2$Z3$Z4$Z5$Z6$Z7 -j ACCEPT [ "${ipv6enable:-0}" -eq 1 ] && ip6tables -t filter -I MIAPLUS -m mac --mac-source $macaddr -m time --kerneltz --timestart $timeon --timestop $timeoff --weekdays $Z1$Z2$Z3$Z4$Z5$Z6$Z7 -j ACCEPT done fi for n in $(seq 1 7) do unset "Z$n" done done } start_ipt(){ enable=$(uci -q get miaplus.@basic[0].enable) [ "${enable:-0}" -eq 0 ] && return 0 iptables -t filter -N MIAPLUS iptables -I INPUT -p udp --dport 53 -m comment --comment "Rule For Control" -j MIAPLUS iptables -I INPUT -p tcp --dport 53 -m comment --comment "Rule For Control" -j MIAPLUS iptables -t nat -A PREROUTING -p udp --dport 53 -j REDIRECT --to-ports 53 -m comment --comment "Rule For Control" iptables -t nat -A PREROUTING -p tcp --dport 53 -j REDIRECT --to-ports 53 -m comment --comment "Rule For Control" strict=$(uci -q get miaplus.@basic[0].strict) [ "${strict:-0}" -eq 1 ] && iptables -t filter -I FORWARD -m comment --comment "Rule For Control" -j MIAPLUS ipv6enable=$(uci -q get miaplus.@basic[0].ipv6enable) if [ "${ipv6enable:-0}" -eq 1 ]; then ip6tables -t filter -N MIAPLUS ip6tables -I INPUT -p udp --dport 53 -m comment --comment "Rule For Control" -j MIAPLUS ip6tables -I INPUT -p tcp --dport 53 -m comment --comment "Rule For Control" -j MIAPLUS ip6tables -t nat -A PREROUTING -p udp --dport 53 -j REDIRECT --to-ports 53 -m comment --comment "Rule For Control" ip6tables -t nat -A PREROUTING -p tcp --dport 53 -j REDIRECT --to-ports 53 -m comment --comment "Rule For Control" [ "${strict:-0}" -eq 1 ] && ip6tables -t filter -I FORWARD -m comment --comment "Rule For Control" -j MIAPLUS fi add_rules } status_ipt(){ if iptables -t filter -S MIAPLUS >/dev/null 2>&1; then echo "running" return 0 fi echo "not running" return 1 } stop_ipt(){ iptables -t filter -D FORWARD -m comment --comment "Rule For Control" -j MIAPLUS 2>/dev/null iptables -D INPUT -p udp --dport 53 -m comment --comment "Rule For Control" -j MIAPLUS 2>/dev/null iptables -D INPUT -p tcp --dport 53 -m comment --comment "Rule For Control" -j MIAPLUS 2>/dev/null iptables -t nat -D PREROUTING -p udp --dport 53 -j REDIRECT --to-ports 53 -m comment --comment "Rule For Control" 2>/dev/null iptables -t nat -D PREROUTING -p tcp --dport 53 -j REDIRECT --to-ports 53 -m comment --comment "Rule For Control" 2>/dev/null iptables -t filter -F MIAPLUS 2>/dev/null iptables -t filter -X MIAPLUS 2>/dev/null notfound=$(type ip6tables | grep not) if [ -z "$notfound" ]; then ip6tables -t filter -D FORWARD -m comment --comment "Rule For Control" -j MIAPLUS 2>/dev/null ip6tables -D INPUT -p udp --dport 53 -m comment --comment "Rule For Control" -j MIAPLUS 2>/dev/null ip6tables -D INPUT -p tcp --dport 53 -m comment --comment "Rule For Control" -j MIAPLUS 2>/dev/null ip6tables -t nat -D PREROUTING -p udp --dport 53 -j REDIRECT --to-ports 53 -m comment --comment "Rule For Control" 2>/dev/null ip6tables -t nat -D PREROUTING -p tcp --dport 53 -j REDIRECT --to-ports 53 -m comment --comment "Rule For Control" 2>/dev/null ip6tables -t filter -F MIAPLUS 2>/dev/null ip6tables -t filter -X MIAPLUS 2>/dev/null fi } # ===================================================================== # fw4 (nftables) # 使用独立表 inet miaplus,避免与 fw4 自身的 nftables 规则冲突。 # # table inet miaplus { # chain input { type filter hook input priority 0; } # 仅匹配 53 端口 # chain prerouting{ type nat hook prerouting priority dstnat; } # DNS 重定向到本机 # } # # DNS 语义与 fw3 一致:只对发往 53 端口的流量做上网控制。 # # NAT 竞争说明:本表 prerouting 链与 fw4 主表(inet fw4)的 PREROUTING/dstnat 同为 # priority -100(dstnat)。nf_tables 允许多表同优先级共存,但同一数据包的同一 hook # 优先级内按表加载顺序处理,conntrack binding(redirect/redirect)先到先得。若 fw4 # 自身对 DNS(53) 也做了重定向/端口转发,两者可能互抢,现象以先加载者为准。 # 一般情况下 DNS 默认直通本机,二者不冲突;如遇规则不生效,优先排查此项。 # ===================================================================== # 构造 nft 的星期集合片段,如 "{ 1, 2 }" / "5" / 空(不限制) # z1..z7 => 周一..周日;nft meta day: 0=Sun,1=Mon,...6=Sat => z1->1 ... nft_dayterm() { local days="" n=1 day for z in "$1" "$2" "$3" "$4" "$5" "$6" "$7"; do [ "$z" = "1" ] || { n=$((n+1)); continue; } day=$(( n % 7 )) # z1..z7 -> 1,2,3,4,5,6,0 days="${days:+$days, }$day" n=$((n+1)) done if [ -z "$days" ]; then echo "" elif echo "$days" | grep -q ,; then echo "{ $days }" else echo "$days" fi } # 去掉前导零(防空串转成 "0"),规避 08/09 被当八进制的算术陷阱 _digits() { echo "$1" | sed -e 's/^0*//' -e 's/^$/0/' } # HH:MM -> 分钟数(输入可为 H:M 或 HH:MM,非零填充) _mins() { local h m h=$(_digits "${1%%:*}") m=$(_digits "${1#*:}") echo $(( ${h:-0} * 60 + ${m:-0} )) } # 任意 "H:M"/"HH:MM" -> 规范 "HH:MM" _pad() { local h m h=$(_digits "${1%%:*}") m=$(_digits "${1#*:}") printf '%02d:%02d' "${h:-0}" "${m:-0}" } # 把一个 [t_on, t_off] 窗口(H:M/HH:MM)转成 nft 时间匹配表达式(行), # 输出到全局变量 NFT_FRAGS。nft 的 meta hour 原生支持 "HH:MM"-"HH:MM"。 # 统一语义:结束分钟视为完整包含(闭区间含其末秒),故上界一律补 :59 — # 非跨午夜 [t_on, t_off] -> "HH:MM"-"t_off:59";跨午夜拆 [t_on,23:59:59]+[00:00,t_off:59]。 nft_split_window() { local t_on t_off NFT_FRAGS="" [ -n "$1" ] && [ -n "$2" ] || return 0 t_on=$(_pad "$1"); t_off=$(_pad "$2") if [ "$(_mins "$t_on")" -le "$(_mins "$t_off")" ]; then NFT_FRAGS="meta hour \"$t_on\"-\"$t_off:59\"" else # 跨午夜:拆成 [on,23:59:59] + [00:00,off:59] NFT_FRAGS="meta hour \"$t_on\"-\"23:59:59\" meta hour \"00:00\"-\"$t_off:59\"" fi } # 统一执行 nft 规则命令并检查返回码。 # 失败时记日志、立即回滚删表并置全局 NFT_FAIL=1(供调用方中止后续写入), # 使最终状态收敛为"完整规则表"或"空表",避免留下只 DROP 无 ACCEPT 的断网中间态。 nft_rule() { # 已失败则短路,避免对已回滚删除的表继续逐条报错刷屏 [ -n "$NFT_FAIL" ] && return 1 "$@" 2>/dev/null || { logger -t miaplus "nft rule failed: $*" stop_nft NFT_FAIL=1 } } # 组合规则前缀:链决定是否只限 53 端口;ipv6enable=0 时限定 ipv4 nft_prefix() { local chain=$1 local pref="" [ "$chain" = "forward" ] || pref="meta l4proto { tcp, udp } th dport 53 " if [ "$ipv6enable" != "1" ]; then pref="meta nfproto ipv4 $pref" fi NFT_PREFIX="$pref" } # 插入一条白名单 ACCEPT 规则(insert 到链首,兜底 DROP 在尾) # 参数:MAC day_term [链名=当前] nft_insert_accept() { local mac=$1 day=$2 chain=${3:-input} nft_prefix "$chain" local cond while IFS= read -r frag; do [ -n "$frag" ] || continue cond="$NFT_PREFIX ether saddr $mac $frag" [ -n "$day" ] && cond="$cond meta day $day" nft_rule nft insert rule inet miaplus $chain $cond accept [ -n "$NFT_FAIL" ] && return 1 done </dev/null 2>&1; then echo "running" return 0 fi echo "not running" return 1 } stop_nft(){ nft delete table inet miaplus 2>/dev/null return 0 } # ===================================================================== # 统一入口 # ===================================================================== start(){ stop if have_fw4; then start_nft else start_ipt fi } status(){ if have_fw4; then status_nft else status_ipt fi } stop(){ if have_fw4; then stop_nft else stop_ipt fi }