op-packages/ifb-shaper

ifb-shaper

Per-client traffic shaper for OpenWrt based on HTB and IFB, configured via UCI.

• Download: HTB on the egress of the interface's device (e.g. br-lan), clients matched by destination address.
• Upload: device ingress is redirected to ifb-<device>, HTB on the IFB, clients matched by source address.
• IPv4 and IPv6, several addresses per client.
• Each client gets its own class with five priority sub-classes (both directions), from highest to lowest priority: HTTP(S) (tcp/80, tcp/443), other TCP, other UDP, QUIC (udp/443), everything else (ICMP etc.).
• fq_codel on every leaf class by default (configurable).

How it works

A shaper section is bound to a logical netifd interface. Its L3 device is resolved at run time and the IFB is created automatically as ifb-<device> (max. 15 chars, so the device name may be up to 11 chars). The shaper is re-applied when the interface changes state or the config is changed.

Class layout (per device and per IFB):

Class	Purpose
1:1	root, total
1:10	bypass (local) networks, local_rate / local_ceil
1:1000	parent of all client classes, down_total / up_total
1:9000	default (unclassified), default_rate / default_ceil
1:<n>1	a client, numbered automatically (max. 2048 per shaper)
1:<n>2..1:<n>6	client sub-classes: HTTP(S), TCP, UDP, QUIC, rest

Networks listed in bypass skip the client classes and go to 1:10. Note that 1:10 is still capped by local_ceil and shared by all clients; set it equal to total for effectively unrestricted local traffic.

Configuration

/etc/config/ifb-shaper:

config shaper 'lan'
	option interface 'lan'
	list bypass '192.168.1.0/24'

config client 'laptop'
	option shaper 'lan'
	list address '192.168.1.100'
	list address '2001:db8:1::100'
	option down_rate '1Mbit'
	option down_ceil '50Mbit'
	option up_rate '1Mbit'
	option up_ceil '20Mbit'

shaper

Option	Default	Description
enabled	1	Enable/disable this shaper
interface	–	Logical interface to shape (required)
bypass	–	List of networks (IPv4/IPv6) not subject to client limits
leaf_qdisc	fq_codel limit 1024 flows 128	qdisc attached to every client sub-class (tc arguments); none disables it
total	1000Mbit	Root class rate
local_rate / local_ceil	50Mbit / 500Mbit	Bypass class
down_total / up_total	400Mbit / 300Mbit	Aggregate rate of all clients
default_rate / default_ceil	1Mbit / 15Mbit	Unclassified traffic

client

Option	Default	Description
shaper	–	Logical interface name of the shaper (required)
address	–	Host or network, IPv4 or IPv6; may be a list (required)
down_rate / down_ceil	1Mbit / –	Guaranteed / maximum download (down_ceil required)
up_rate / up_ceil	1Mbit / –	Guaranteed / maximum upload (up_ceil required)

Rates use tc notation (kbit, Mbit, ...). Clients are matched in file order, so put specific hosts before wide subnets that contain them.

Notes

• The ingress hook of the device may be shared with other tools (clsact from qosify etc.). It is never deleted or replaced: if there is no ingress/clsact qdisc, clsact is created, and only the shaper's own redirect filters (prio 4900 for IPv4, 4901 for IPv6) are managed. After stop an empty clsact stays on the device.
• Software/hardware flow offloading can bypass tc for offloaded flows.

Usage

/etc/init.d/ifb-shaper enable
/etc/init.d/ifb-shaper start|stop|reload
/etc/init.d/ifb-shaper dump      # print the tc commands without applying
logread -e ifb-shaper            # errors reported by tc

Dependencies

tc, ip, kmod-ifb (pulls in kmod-sched-core).

Luci Application

• luci-app-ifb-shaper