op-packages/luci-app-iperf3-server/root/etc/init.d/iperf3-server

#!/bin/sh /etc/rc.common
# iPerf3 Server init (OpenWrt 23.05) - procd multi-instance (UCI-only fetch)
# UCI: /etc/config/iperf3-server
#
# config iperf3-server
#   option main_enable '1'
#
# config servers
#   option enable_server '1'
#   option port '5201'
#   option delay '0'
#   option extra_options ''

USE_PROCD=1
START=99

PROG="/usr/bin/iperf3"
CONFIG="iperf3-server"
LOGGER="logger -t iPerf3-Server"

# 与 CBI 的 extra_options 校验保持一致：拦截明显 shell 元字符
is_safe_extra_opts() {
	[ -z "$1" ] && return 0
	case "$1" in
		*";"*|*"&"*|*"|"*|*"\`"*|*"\$"*|*"<"*|*">"*|*"\""*|*"'"* )
			return 1
		;;
	esac
	return 0
}

# 停止某端口：既杀 iperf3 server，也杀 delay 阶段的 sh/sleep
kill_by_port() {
	local port="$1"
	local pids

	# 1) 已经起来的 iperf3 server
	pids="$(ps w | grep '[i]perf3' | grep ' -s' | grep " -p $port" | awk '{print $1}')"
	[ -n "$pids" ] && kill $pids 2>/dev/null

	# 2) delay 阶段：/bin/sh -c "sleep N; exec iperf3 -s -p PORT ..."
	pids="$(ps w | grep '[s]leep' | grep '[i]perf3' | grep " -p $port" | awk '{print $1}')"
	[ -n "$pids" ] && kill $pids 2>/dev/null

	sleep 1

	# hard kill 兜底
	pids="$(ps w | grep '[i]perf3' | grep ' -s' | grep " -p $port" | awk '{print $1}')"
	[ -n "$pids" ] && kill -9 $pids 2>/dev/null

	pids="$(ps w | grep '[s]leep' | grep '[i]perf3' | grep " -p $port" | awk '{print $1}')"
	[ -n "$pids" ] && kill -9 $pids 2>/dev/null
}

# 获取 servers 索引列表（0 1 2 ...）
get_server_indexes() {
	# 从 uci show 里提取 @servers[NUM]
	uci -q show "$CONFIG" 2>/dev/null \
		| sed -n "s/^$CONFIG\.@servers\[\([0-9]\+\)\]=servers$/\1/p"
}

start_one_idx() {
	local idx="$1"

	local enable_server port delay extra_options
	enable_server="$(uci -q get $CONFIG.@servers[$idx].enable_server)"
	port="$(uci -q get $CONFIG.@servers[$idx].port)"
	delay="$(uci -q get $CONFIG.@servers[$idx].delay)"
	extra_options="$(uci -q get $CONFIG.@servers[$idx].extra_options)"

	# 默认值
	[ -n "$enable_server" ] || enable_server="1"
	[ -n "$port" ] || port="5201"
	[ -n "$delay" ] || delay="0"

	[ "$enable_server" = "1" ] || return 0

	# 端口合法性兜底
	case "$port" in
		*[!0-9]*|'') $LOGGER "Skip invalid port in @servers[$idx]"; return 0 ;;
	esac
	[ "$port" -ge 1 ] 2>/dev/null && [ "$port" -le 65535 ] 2>/dev/null || {
		$LOGGER "Skip invalid port [$port] in @servers[$idx]"
		return 0
	}

	# delay 合法性兜底
	case "$delay" in
		*[!0-9]*|'') delay=0 ;;
	esac

	# extra_options 安全兜底
	if [ -n "$extra_options" ] && ! is_safe_extra_opts "$extra_options"; then
		$LOGGER "Rejected unsafe extra_options on port [$port] (@servers[$idx])"
		extra_options=""
	fi

	$LOGGER "Starting @servers[$idx] port=[$port] delay=[$delay] ..."

	# procd 实例名按端口
	procd_open_instance "iperf3_${port}"

	# 不用 -D；delay 用 sh -c 不阻塞
	if [ "$delay" -gt 0 ] 2>/dev/null; then
		if [ -n "$extra_options" ]; then
			procd_set_param command /bin/sh -c "sleep $delay; exec $PROG -s -p $port $extra_options"
		else
			procd_set_param command /bin/sh -c "sleep $delay; exec $PROG -s -p $port"
		fi
	else
		if [ -n "$extra_options" ]; then
			procd_set_param command "$PROG" -s -p "$port" $extra_options
		else
			procd_set_param command "$PROG" -s -p "$port"
		fi
	fi

	procd_set_param respawn 3600 5 5
	procd_set_param stdout 1
	procd_set_param stderr 1
	procd_close_instance
}

start_service() {
	[ -x "$PROG" ] || { $LOGGER "iperf3 not found: $PROG"; return 1; }

	# 主开关：直接用 uci 读取匿名段
	local main_enable
	main_enable="$(uci -q get $CONFIG.@iperf3-server[0].main_enable)"
	[ -n "$main_enable" ] || main_enable="0"

	[ "$main_enable" = "1" ] || {
		$LOGGER "iPerf3 Server is disabled ..."
		return 0
	}

	# 遍历 servers 索引
	local idx
	for idx in $(get_server_indexes); do
		start_one_idx "$idx"
	done

	return 0
}

stop_one_idx() {
	local idx="$1"
	local enable_server port

	enable_server="$(uci -q get $CONFIG.@servers[$idx].enable_server)"
	[ -n "$enable_server" ] || enable_server="1"
	[ "$enable_server" = "1" ] || return 0

	port="$(uci -q get $CONFIG.@servers[$idx].port)"
	[ -n "$port" ] || port="5201"

	case "$port" in
		*[!0-9]*|'') return 0 ;;
	esac

	kill_by_port "$port"
}

stop_service() {
	$LOGGER "Stopping iPerf3 Server ..."

	# 按 servers 列表逐个端口清理（不误杀其它 iperf3）
	local idx
	for idx in $(get_server_indexes); do
		stop_one_idx "$idx"
	done

	return 0
}

reload_service() {
	# /etc/init.d/iperf3-server reload
	stop
	start
}

service_triggers() {
	procd_add_reload_trigger "$CONFIG"
}