mirror of
https://github.com/kiddin9/op-packages.git
synced 2026-07-27 02:11:19 +08:00
72 lines
2.4 KiB
Bash
Executable File
72 lines
2.4 KiB
Bash
Executable File
#!/bin/sh
|
|
POE="$(uci -q get event-handler.@event-handler[0].poe_gpio)"
|
|
USB="$(uci -q get event-handler.@event-handler[0].usb_gpio)"
|
|
HEAT="$(uci -q get event-handler.@event-handler[0].heat_gpio)"
|
|
WD="$(uci -q get event-handler.@event-handler[0].wd_gpio)"
|
|
LOG=/etc/event_log
|
|
int=$1
|
|
|
|
while true; do
|
|
touch $LOG
|
|
DATE=$(date)
|
|
INTS_MASK=$(cat /sys/class/i2c-dev/i2c-0/device/0-0011/int_sum)
|
|
|
|
# poe out power error int
|
|
if [[ "$(echo $((INTS_MASK & 1)))" == "1" ]]; then
|
|
VALUE=$(cat /sys/class/gpio/gpio$POE/value)
|
|
if [[ "$VALUE" == "1" ]]; then
|
|
echo "$DATE: ${int:+$int: }poe: Warning! The maximum current limit on the PoE-OUT output has been exceeded." >> $LOG
|
|
else
|
|
echo "$DATE: ${int:+$int: }poe: The PoE-OUT output current has been restored to normal values after exceeding the maximum thresholds." >> $LOG
|
|
fi
|
|
fi
|
|
|
|
# usb power error int
|
|
if [[ "$(echo $((INTS_MASK & 2)))" == "2" ]]; then
|
|
VALUE=$(cat /sys/class/gpio/gpio$USB/value)
|
|
if [[ "$VALUE" == "1" ]]; then
|
|
echo "$DATE: ${int:+$int: }usb: Warning! The maximum current limit for the USB has been exceeded." >> $LOG
|
|
else
|
|
echo "$DATE: ${int:+$int: }usb: The USB current has been restored to normal values after exceeding the maximum threshold." >> $LOG
|
|
fi
|
|
fi
|
|
|
|
# heat int
|
|
if [[ "$(echo $((INTS_MASK & 4)))" == "4" ]]; then
|
|
VALUE=$(cat /sys/class/gpio/gpio$HEAT/value)
|
|
if [[ "$VALUE" == "1" ]]; then
|
|
echo "$DATE: ${int:+$int: }heat: The device heating circuit is enabled." >> $LOG
|
|
else
|
|
echo "$DATE: ${int:+$int: }heat: The device heating circuit is disabled." >> $LOG
|
|
fi
|
|
fi
|
|
|
|
# wd toggle int
|
|
if [[ "$(echo $((INTS_MASK & 8)))" == "8" ]]; then
|
|
VALUE=$(cat /sys/class/gpio/gpio$WD/value)
|
|
fi
|
|
|
|
# voltage threshold int
|
|
if [[ "$(echo $((INTS_MASK & 16)))" == "16" ]]; then
|
|
input_voltage="$(cat /sys/class/i2c-dev/i2c-0/device/0-0011/input_voltage)"
|
|
voltage_threshold="$(cat /sys/class/i2c-dev/i2c-0/device/0-0011/voltage_threshold)"
|
|
poe_out_power_gpio="$(uci -q get powersupply.system.poe_out_power_gpio)"
|
|
if [[ "$input_voltage" -lt "$voltage_threshold" ]]; then
|
|
echo 0 > /sys/class/gpio/gpio$poe_out_power_gpio/value
|
|
echo "$DATE: ${int:+$int: }voltage: PoE-OUT power supply is disabled. The input voltage is below the required threshold of $voltage_threshold mV DC. Current voltage: $input_voltage mV." >> $LOG
|
|
fi
|
|
fi
|
|
|
|
if [[ "$(wc -l < $LOG)" -ge "100" ]]; then
|
|
mv $LOG $LOG.old
|
|
fi
|
|
|
|
if [[ -n "$int" ]]; then
|
|
break
|
|
fi
|
|
|
|
sleep 1
|
|
done
|
|
|
|
exit 0
|