update 2026-07-28 05:05:23

lean/mt/mtkiappd/files/README

@@ -1,49 +0,0 @@
-mtkiappd - user space daemon supported 802.11f protocol
-          for RTxxxx a/b/g/n SoftAP driver, Ralink Technology, Corp.
-=================================================================
-
-This is the README file for the 802.11f/802.11r/802.11k daemon - mtkiappd,
-which comes with RTxxxx SoftAP driver.
-
-
-I. Introduction
-=================================================================
-mtkiappd is an optional user space component for RTxxxx SoftAP driver. 
-
-
-II. 802.11f features in mtkiappd
-=================================================================
-IEEE Std 802.11F-2003 is a standard for inter-access point protocol(IAPP).
-It can handle issues on multi-verder access point interoperability.
-
-There are three major topics which 802.11f supported,
-1. ADD-notify
-2. MOVE-notify
-3. CACHE-notify
-
-mtkiappd only supports ADD-notify in current phase due to lack of support from radius server
-
-There are three major topics which 802.11r supported,
-1. Key Distribution Protocol
-
-There are three major topics which 802.11k supported,
-1. Neighbor Report
-
-Some ethernet card needs special configuration to support multicasting.
-Make sure your ethernet card support multicasting
-
-
-III. How to start mtkiappd
-=================================================================
-Note: the broadcast/netmask address of all AP must be the same.
-1. If you want to debug mtkiappd, add CFLAGS with DBG.
-2. If you want to extend wifi control interface, 
-   modify "MAX_WIFI_COUNT" in rtmpiapp.h. (default setting is 2)
-3. First we need to compile the source code using 'make' command
-4. Load RTxxxx SoftAP driver - ex: rt2860ap.ko
-5. Manually start mtkiappd, type $mtkiappd
-6. For wifi multi-interface, type $mtkiappd -wi ra0 -wi rai0
-
-
-IV. Reference
-IEEE Std 802.11F-2003, IEEE802.11r, IEEE802.11k