update 2026-10-29 11:59:06

my-default-settings/files/sbin/coremark

@@ -1,3 +0,0 @@
-#!/bin/ash
-
-/bin/coremark | grep "CoreMark 1.0" | cut -d "/" -f 1 | cut -d "." -f -2 | sed -e 's/CoreMark 1.0\(.*\)/(CpuMark\1 Scores)/g' | tee /etc/bench.log

my-default-settings/files/sbin/mywifi

@@ -1,235 +0,0 @@
-#!/bin/sh
-#
-# Optimized OpenWrt WiFi Configuration Script
-#
-
-LOCK_FILE="/var/run/mywifi.lock"
-[ -f /etc/openwrt_release ] && . /etc/openwrt_release
-
-log_info()  { echo "[INFO] $*"; }
-log_error() { echo "[ERROR] $*" >&2; }
-
-show_help() {
-    cat << 'EOF'
-用法:
-  mywifi [选项]
-
-选项:
-  -s, --ssid <名称>       指定基础WiFi名称（默认使用系统 hostname / Kwrt）
-  -p, --password <密码>   指定WiFi密码（8-63 位，未指定时默认开放网络）
-  -f, --force             强制重新配置（忽略 wifi=1 完成标记）
-  -h, --help              查看帮助信息
-
-命名规范:
-  <WiFi名>_2.4G / <WiFi名>_5G / <WiFi名>_6G
-EOF
-}
-
-# -------------------------------------------------------------
-# 1. 参数解析
-# -------------------------------------------------------------
-CUSTOM_SSID=""
-CUSTOM_PASSWD=""
-HAS_PASSWD=0
-FORCE=0
-
-while [ $# -gt 0 ]; do
-    case "$1" in
-        -h|--help)    show_help; exit 0 ;;
-        -f|--force)   FORCE=1 ;;
-        -s|--ssid)
-            [ $# -ge 2 ] && [ "${2#-}" = "$2" ] && { shift; CUSTOM_SSID="$1"; }
-            ;;
-        -p|--password)
-            if [ $# -ge 2 ] && [ "${2#-}" = "$2" ]; then
-                shift; CUSTOM_PASSWD="$1"; HAS_PASSWD=1
-            else
-                CUSTOM_PASSWD=""; HAS_PASSWD=0
-            fi
-            ;;
-    esac
-    shift
-done
-
-# -------------------------------------------------------------
-# 2. 状态标记检查与防并发锁
-# -------------------------------------------------------------
-# 既未强制重新配置，又无自定义参数，且已配置过时直接跳过
-if [ $FORCE -eq 0 ] && [ -z "$CUSTOM_SSID" ] && [ $HAS_PASSWD -eq 0 ]; then
-    if [ "$(uci -q get system.@status[0].wifi 2>/dev/null)" = "1" ]; then
-        log_info "WiFi 已配置完成，无需重复执行。"
-        exit 0
-    fi
-fi
-
-# 文件锁（有任务参数时排队等待，否则遇锁直接退出）
-WAIT_LOCK=0
-[ $FORCE -eq 1 ] || [ -n "$CUSTOM_SSID" ] || [ $HAS_PASSWD -eq 1 ] && WAIT_LOCK=1
-
-exec 9>"$LOCK_FILE" 2>/dev/null || true
-if ! flock -n 9 2>/dev/null; then
-    if [ $WAIT_LOCK -eq 1 ]; then
-        log_info "检测到 mywifi 正在运行，等待其执行完毕..."
-        flock -w 60 9 2>/dev/null || { log_error "等待执行超时（60s）！"; exit 1; }
-    else
-        log_info "检测到 mywifi 正在运行，直接终止。"
-        exit 0
-    fi
-fi
-
-# 密码合法性检查
-if [ $HAS_PASSWD -eq 1 ] && [ -n "$CUSTOM_PASSWD" ]; then
-    pwd_len=${#CUSTOM_PASSWD}
-    if [ "$pwd_len" -lt 8 ] || [ "$pwd_len" -gt 63 ]; then
-        log_error "WiFi 密码长度必须在 8 到 63 个字符之间！"
-        exit 1
-    fi
-fi
-
-# -------------------------------------------------------------
-# 3. 硬件驱动与 UCI 就绪检测
-# -------------------------------------------------------------
-wait_wifi_ready() {
-    local waited=0
-    while [ $waited -lt 15 ]; do
-        local phys="$(ls -d /sys/class/ieee80211/phy* 2>/dev/null)"
-        local phy_count=$(echo $phys | wc -w)
-        local uci_radios="$(uci -q show wireless | sed -n 's/^wireless\.\([^.]*\)=wifi-device/\1/p')"
-        local uci_count=$(echo $uci_radios | wc -w)
-
-        # 缺少配置文件或配置项落后于物理网卡时，触发 wifi config 生成默认配置
-        if [ $phy_count -gt "$uci_count" ] || { [ $phy_count -eq 0 ] && [ ! -s /etc/config/wireless ]; }; then
-            command -v wifi >/dev/null && wifi config >/dev/null 2>&1
-            uci_radios="$(uci -q show wireless | sed -n 's/^wireless\.\([^.]*\)=wifi-device/\1/p')"
-            uci_count=$(echo $uci_radios | wc -w)
-        fi
-
-        if [ "$uci_count" -gt 0 ] && { [ "$phy_count" -eq 0 ] || [ "$uci_count" -ge "$phy_count" ]; }; then
-            return 0
-        fi
-        sleep 1
-        waited=$((waited + 1))
-    done
-    return 1
-}
-
-if ! wait_wifi_ready; then
-    log_error "未检测到可用无线硬件或无线配置生成超时！"
-    exit 1
-fi
-
-# -------------------------------------------------------------
-# 4. 辅助函数：频段识别 & Hostname 解析
-# -------------------------------------------------------------
-detect_band() {
-    local radio="$1"
-    local band="$(uci -q get wireless.${radio}.band | tr 'A-Z' 'a-z')"
-    case "$band" in
-        *2g*|*2.4g*) echo "2g"; return ;;
-        *5g*)        echo "5g"; return ;;
-        *6g*)        echo "6g"; return ;;
-    esac
-
-    local channel="$(uci -q get wireless.${radio}.channel)"
-    if [ -n "$channel" ] && [ "$channel" -eq "$channel" ] 2>/dev/null; then
-        [ "$channel" -ge 1 ]   && [ "$channel" -le 14 ]  && { echo "2g"; return; }
-        [ "$channel" -ge 32 ]  && [ "$channel" -le 177 ] && { echo "5g"; return; }
-        [ "$channel" -ge 180 ] && { echo "6g"; return; }
-    fi
-
-    local hwmode="$(uci -q get wireless.${radio}.hwmode | tr 'A-Z' 'a-z')"
-    case "$hwmode" in
-        *a*)    echo "5g"; return ;;
-        *b*|*g*) echo "2g"; return ;;
-    esac
-
-    # 针对双频 radio0/radio1 的交叉推导
-    if [ "$radio" = "radio0" ] && [ "$(uci -q get wireless.radio1.band)" = "5g" ]; then
-        echo "2g"; return
-    elif [ "$radio" = "radio1" ] && [ "$(uci -q get wireless.radio0.band)" = "2g" ]; then
-        echo "5g"; return
-    fi
-
-    echo "2g"
-}
-
-get_base_ssid() {
-    [ -n "$CUSTOM_SSID" ] && { echo "$CUSTOM_SSID"; return; }
-    local h="$(uci -q get system.@system[0].hostname)"
-    case "$h" in
-        ""|ieee80211|"(none)"|OpenWrt) echo "Kwrt" ;;
-        *) echo "$h" ;;
-    esac
-}
-
-# -------------------------------------------------------------
-# 5. 无线配置生成
-# -------------------------------------------------------------
-BASE_SSID="$(get_base_ssid)"
-
-# 清理 disabled 配置行并规范化 radio0/radio1 频段
-sed -i '/option disabled/d' /etc/config/wireless 2>/dev/null
-[ "$(uci -q get wireless.radio1.band)" = "5g" ] && [ -z "$(uci -q get wireless.radio0.band)" ] && \
-    uci -q set wireless.radio0.band="2g"
-
-# 重命名现有匿名 wifi-iface 为 default_radioX，便于幂等管理
-idx=0
-while uci rename wireless.@wifi-iface[$idx]="default_radio$idx" 2>/dev/null; do
-    idx=$((idx + 1))
-done
-
-# 获取所有射频设备
-RADIOS="$(uci -q show wireless | sed -n 's/^wireless\.\([^.]*\)=wifi-device/\1/p')"
-[ -z "$RADIOS" ] && RADIOS="radio0 radio1 radio2 radio3"
-
-for radio in $RADIOS; do
-    uci -q get wireless.${radio} >/dev/null 2>&1 || continue
-
-    band="$(detect_band "$radio")"
-    case "$band" in
-        2g) suffix="_2.4G" ;;
-        5g) suffix="_5G" ;;
-        6g) suffix="_6G" ;;
-        *)  suffix="_${band}" ;;
-    esac
-
-    full_ssid="${BASE_SSID}${suffix}"
-    iface="default_${radio}"
-
-    # 配置 radio 参数
-    uci -q del wireless.${radio}.disabled
-    uci -q set wireless.${radio}.country='CN'
-    [ "$band" = "5g" ] && case "$DISTRIB_TARGET" in *ipq60xx*) uci -q set wireless.${radio}.htmode='HE80' ;; esac
-
-    # 配置 iface 参数
-    uci -q get wireless.${iface} >/dev/null 2>&1 || uci -q set wireless.${iface}=wifi-iface
-    uci -q set wireless.${iface}.device="${radio}"
-    uci -q set wireless.${iface}.mode='ap'
-    uci -q set wireless.${iface}.network='lan'
-    uci -q set wireless.${iface}.ssid="${full_ssid}"
-
-    if [ $HAS_PASSWD -eq 1 ] && [ -n "$CUSTOM_PASSWD" ]; then
-        enc="psk2"
-        [ "$band" = "6g" ] && enc="sae"
-        uci -q set wireless.${iface}.encryption="$enc"
-        uci -q set wireless.${iface}.key="$CUSTOM_PASSWD"
-        log_info "${radio} (${band}): SSID='${full_ssid}', 加密='${enc}'"
-    else
-        uci -q set wireless.${iface}.encryption='none'
-        uci -q del wireless.${iface}.key
-        log_info "${radio} (${band}): SSID='${full_ssid}', 无密码 (开放网络)"
-    fi
-done
-
-# -------------------------------------------------------------
-# 6. 提交配置与重载
-# -------------------------------------------------------------
-uci commit wireless 2>/dev/null
-
-uci -q get system.@status[0] >/dev/null || uci -q add system status >/dev/null
-uci -q set system.@status[0].wifi=1
-uci commit system 2>/dev/null
-
-wifi reload 2>/dev/null || /sbin/wifi reload 2>/dev/null
-
-log_info "无线配置已更新并生效。"

my-default-settings/files/sbin/shutdown

@@ -1,68 +0,0 @@
-#!/bin/ash
-
-# 默认使用关机命令
-ACTION="poweroff"
-
-# 获取shutdown参数
-# Qemu-GA 默认调用 -h -P +0的方式
-while [ -n "$1" ]; do
-	case "$1" in
-        -r)
-        ACTION="reboot"
-		shift
-        ;;
-
-        -k)
-        ACTION="warning"
-		shift
-        ;;
-
-        -h|-H)
-        ACTION="halt"
-		shift
-        ;;
-
-        -n)
-        ACTION="poweroff"
-		shift
-        ;;
-
-        -c)
-        echo "Cancel shutdown, but not support the Openwrt!" > /dev/kmsg
-        ACTION="stop"
-		shift
-        ;;
-
-        -p|-P)
-        ACTION="poweroff"
-		shift
-        ;;
-
-        -*)
-		shift
-		;;
-
-		*)
-		break
-		;;
-
-	esac
-done
-
-if [ $# == 0 ]; then
-    echo "Shutting down without any params" > /dev/kmsg
-    /sbin/poweroff
-
-elif [ "$ACTION" = "poweroff" ]; then
-    /sbin/poweroff;
-
-elif [ "$ACTION" = "reboot" ]; then
-    /sbin/reboot
-
-elif [ "$ACTION" = "warning" ]; then
-    echo "关机警告">/dev/kmsg
-    /sbin/poweroff;
-
-elif [ "$ACTION" = "halt" ]; then
-    /sbin/halt
-fi